electrical isues

[pgguru]

My Suburban is having a weird electrical problem. The power seats and locks work fine until I start the truck then they blow the circuit breaker. (well it blows before you try to use them) then when I shut it off and let the breaker cool off they work again. I don't have any wiring diagrams for the truck so I can't tell were the problem could be coming from.
Note 1 I don't have to start the truck just turning to acc will blow it.
Note 2 I lost the bearing in the Alienator on Sunday and it started doing it wile the alt was dead.

So any help would be great
Thanks

 

[NVW]

Look at post 4 of this thread. You can get wiring diagrams there.

Leo

 

[pgguru]

I am sure you meant to post a thread But it did not show up?..
Thanks though

 

[NVW]

Did you click on the link? greatfalls is the user ID, publiclibrary is the password. Try this: http://arrc.epnet.com/autoasp/index.asp?sid=333817&uid=s8393054.main.autorefctr

Just click on the year of your truck and you should be good to go

Leo

 

[buddy]

You have circuit breakers in the truck?

 

[pgguru]

Hmm the site is down this morning...
The 2 big shiny fuses in the front of the fuse panel are breakers. They will reset when they cool down after they over current.

 

[NVW]

Try clicking on the link in post 4 of the Technical Library and use the Username and Password that is there. It just worked for me.

Leo

 

[pgguru]

I am still getting web page can not be displayed.
I have found it to be a problem in the drivers seat I think. It troughs the breaker as soon as I sit in the seat. If I unplug the power seat it is okay.

 

[NVW]

http://arrc.epnet.com/autoasp/index.asp?sid=31856117&uid=s8393054.main.autorefctr

try this again