DB2 information

[6.2 turbo]

Just be careful taking the hose on and of ,the fitting will break flush with the housing. This why I had to drill and tap to 1/8 pipe. I slit the hose every time now before even tugging on it.

 

[3500GMC]

^^Good tip right there.^^

 

[turbonator]

Just be careful taking the hose on and of ,the fitting will break flush with the housing. This why I had to drill and tap to 1/8 pipe. I slit the hose every time now before even tugging on it.

yeah, x-2 on that, those barbed fittings are a biotch to get the hose off..... dont even need clamps.....

 

[Acesneights1]

Maybe I'll try drilling the Db24911 before I have it rebuilt so they can torque and bench test.