• Welcome to The Truck Stop! We see you haven't REGISTERED yet.

    Your truck knowledge is missing!
    • Registration is FREE , all we need is your birthday and email. (We don't share ANY data with ANYONE)
    • We have tons of knowledge here for your diesel truck!
    • Post your own topics and reply to existing threads to help others out!
    • NO ADS! The site is fully functional and ad free!
    CLICK HERE TO REGISTER!

    Problems registering? Click here to contact us!

    Already registered, but need a PASSWORD RESET? CLICK HERE TO RESET YOUR PASSWORD!

6.5 help

jcr

New Member
Messages
1
Reaction score
0
my 96 6.5 is not starting and running. i replaced the lift pump, the relocated pmd (again) and the oil pressure switch and the filter. the truck was running great and then it just shut off. it sat for a couple of hours than started right up,ran for about 5 min than shut off. started up revved real high on its own than shut right off (than new parts) did not start again. towed to mechanics. mechanic bleed air out of lines at the injector and the truck would start but shut off again after sometimes 30 min or just a couple of secs. no smoke, no check engine light. is there really some sort of a sock filter in the tank? could that be it? the truck runs great (when its running) so i dont think it would be the ip. my mechanic gave up. what should i check next? any input would be helpful and appreciated.
thanks
jcr
 
When it is running, open up the drain valve and see if you get fuel flow.

Any SES codes?

How old is the PMD? Where did you get it?
 
Back
Top