I have some real stubborn black, moldy stains that won't come off. I have tried bleach, scrubbing and several soaps with no luck. Anyone find a good cleaner for this?
Taking the LB7 to the shop to have it diagnosed for white smoke at idle. Sure hoping it is an injector cup or rail pressure sensor and not injectors. Injectors were done once at 90K and now have 140K. I change the fuel filter every 10K with a napa gold or AC Delco and use 2-stroke oil in warm...
I am putting a boost and pyro gauge in my 2500. My question is, since I have a banks big head with a larger vacuum hose, will this effect the accuracy of the gauge or is PSI of vacuum the same no matter the diameter of house. I know when you talking pressure, for instance in a garden hose, 60...
I have narrowed my pick of tuners down to these. Any one have any opinions on them?
BD Intimidator
Bully Dog Power Pup
HP Tuners
HyperTech
PPE Xcelerator
Predator
Quadzilla Stealth
SuperChips Micro Tune
I have an occasional coolant leak. It seems to leak over night when it is cold (like 10ish). This morning there was a small wet spot on the driver side. I can see it dripping from the rear of the engine where the allison bolts onto it. Could be running from anywhere though. The dealer...
My wife took my truck to the dealer today for my smoking at idle issue. I removed my edge but left the banks intake and big head on. Right away, they said the banks stuff will void any injector warranty work! What a crock! Anyone ever find a dealer that has a good diesel tech that...
I have these codes on my truck.
P0193 Fuel Rail Pres Sensor Circ Hi Input
P0380 Glow Plug Circ Error Circ A
P0540 Manifold Intake Air Heater Circ
P0090 Fuel Pres Reg Ctrl Circ
It smokes badly at idle, no matter if it is cold or at operating temperature, but runs fine. Which one should...
I had a SES light come on so I had Autozone do a scan and got 5 codes returned. I never trust their code descriptions. Was hoping someone could give me GM's real description. The codes are;
P0193
P0380
P0540
P0090
U1800
Thanks!
I have a 31' bumper hitch camper. I pulls pretty well but occasionaly, on windy days gets to swaying a bit. Does someone make just a sway bar without the load distribution (I have air bags)? Would also like to keep my nice aluminum drop hitch.
Since a trip to MN a month ago, (-12 degrees F) My edge does not sense air intake temperature below 32 degrees. I have also developed a smoking exhaust, at idle only. I am wondering if my Air Flow Sensor has gone bad? Any way to test it?
My truck can from the east coast and has a lot of oxidization on the engine and engine components. Kind of a white scally look. Has anyone found a good way to clean this up?
Has anyone tackled this job themselves? I am about 99% certain I have a blown gasket on one side if not both. I have white smoke at idle, pressure in my coolant system and now a puddle of coolant on the drivers side rear of the engine. Anthing else I should do since it needs torn down to the...
Going from Central Ohio to Florida via Rt 75 if anyone needs something hauled along that route, let me know. I'll make you a good deal to help offset fuel. Heading down Oct 31st and Back on Nov 8th. Thanks!
When you have a 10K-15K load on, do you use cruise control on grades? I have used cruise and just let the d/a do its job, but I just don't like the sudden downshift and screaming RPMs when it can't gain the speed that is set. I have also sped up on downgrades and let it gradually slow on the up...