Search results

Thanks guys

My truck has 2 in a row. What do they do?

thats it

After fixing my problem in my last thread (thanks for all the help) I thought I'd tell you about my latest upgrades. I installed the ATT with a kojo tune. I have 4:10 gears and tow a lot. The truck has a GEP Ted's trucks take out, bigger precups, ARP studs, and FTB The truck ran great...

Well I think I got it. Pulled the upper intake for access to the OS harness. Unplugged the harness, checked for frayed wires and plugged it back in and ta da it runs smooth again. That OS harness has at least 3 parts to it. It goes from the OS to a small black rectangular box, then to another...

Got a helper to watch for bubbles at 3000 rpm. None

Another note, Ive been buying fuel at Safeway and they started selling B20 a while back. Could this contribute? Also the fuel out of the FFm and in the clear tube all looks clean and clear.

Thanks Leroy, I read that also. Does the clear tube in the return with out bubbles at idle rule out air in the lines at higher rpm? I ran a long hose with fuel gauge to the cab. Briefly dropped to 0 at WOT and came right back up but it stutters with 3 psi. Next step is to pull the upper intake...

Just got it to throw code 18 Pump Cam Reference Pulse Error. what does this mean?

I pulled the supply side off the LP and fuel freely flowed from the tank. No restrictions?

So this morning I put in a piece of clear tube. Only a few small air bubbles at first the none at all. Shut the truck off and the fuel gauge read 6 lb and is very slowly dropping down. The truck took a little to start. maybe the fuel was bled down? When I removed the return line, to install the...

It started out occasionally last weekend under load and has progressed to all the time above idle. As soon as I start to accelerate it starts to stutter. Leroy do you sell the stock lift pump?

My '95 started stumbling last weekend. I figured the fuel filter was dirty. it got progressively worse. Replaced the fuel filter today and it didn't help so I went through the list. 1) checked codes. There are none. 2) tried known good PMD. 3) checked and cleaned all grounds, 4) changed...

Easy in the truck. Set the head on and then put in the studs.

Leroy, How much is the kojo tune

You know I don't need a hot rod off the line. I want to roll with a combined weight of 17-18 k. Like I said earlier I tow in third at 2900 rpm and from what I've read that is home base for the ATT.

The old precups are cracked. I thought a low mile n/a motor would have good precups but no. It was obvious that it is a low mile motor but no telling how it was driven. I sure like it though. Who is selling a hx40 down pipe. I tow with this and a turbo upgrade is in the near future. I don't...

Leroydiesel.com

i need to replace my splash guards. What material did you use?

Okay last one.