Search results

So I'm towing a flat car carrier with a G35 on it. I have the trans in Tow/Haul and everything is normal. At one point I try to pass a slower truck in my lane and ease into the throttle. The trans bucks a couple of times and gets stuck in what seems like 3rd gear. The SES light comes on. I pull...

Why won't my Edge Attitude monitor read boost beyond 3lbs? I unplugged it for 20mins and it didn't reset. Anyone?

While upping my programmer to 85 hp, I decided to check my balance rates with my Predator. At idle in Park, this is what it read... -0.07 Cyl #1 -0.40 Cyl #2 -2.72 Cyl #3 -0.58 Cyl #4 -0.40 Cyl #5 -1.30 Cyl #6 -2.00 Cyl #7 -0.83 Cyl #8 I'm not sure what these number...

I'm heading up to New York on or about the 26th of December from the Ft.Lauderdale area. If anybody needs anything hauled PM me.

What are the pro's and con's and is one really better for diesel motors?

Any reccomendations on a strong single tire for heavy towing? I am running a 285/75-16 on another truck I have that I tow with. I have an under bed wheel lift that sees some heavy weight. The Pro-Comps on there now bulge alot when it's loaded down, and I don't want a blowout. Any ideas?

What's the difference between the non turbo motors and the turbo's besides the obvious? My friend has a cutaway 1 ton van with the non turbo. I thought it was turbocharged at first because it has an intercooler, but there is no turbo. The performance is actually really good, as is the milage...

I just axed my body moulding that refused to hold a coat of black paint. I used about 6' of 80# fishing line to saw the mouldings off. Came off pretty easy. Then I used a "magic eraser" wheel to get the adhesive off. That thing works wonders. All I have left to do is clay bar the residue, but...

Well, I went and did it. My buddy has a Yamaha TTR-125 sitting in his garage. I've been trying to get it to run right after it was sitting for three years. Two carb cleanings later and a new plug and the thing still has a bad stumble. Anyway, I finished doing some work on my truck, and was...

I'm running a 65 hp program on the Predator and I use the Attitude to adjust the level as needed. The first problem I have is that the boost guage on the Attitude is screwy. It read fine at first but as soon as I romped the motor past 20 lbs, it would only read up to 3 lbs no matter what the...

HAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHHAHAHAHAHAHAHAHAHAHAHAHAHAHHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHHAHAHAHAHAAHAAHAAHAHAHAAHAAHAHAHAAHAHAHAHHAHAHHAAHAHHAHAHHAHAHAHAHAHAHAAHAAHAHAHHAAHAAHHAHAHAHAHAHAH...