Swapped 24v DB2 pump to a DS4 today and when we pulled the gear cover we found the internals on the Dalton look brand new. Pump built date was Jan 2015 and the pump gears had 15/18 marked in paint. It might be 15 118 but it confirms this one was built 2015. Even the anaerobic sealer looked new..
Filter then cooler for both. Seemed to be arguments for both ways on web. I figured filtered oil would keep crud out of expensive cooler and hot oil would flow and filter better.
Down side is measuring hot oil temp at senders.
Made mor progress to my mods this week. Got radiator, condenser, and Derale trans cooler in. Flushed the liquid line and rear ac lines and hooked up everything but the rear evap.
Removed the beloved filter / cooler line adapter and plumed remote filter and radiator cooler. I decided to use the...
I'm almost done with the broken stuff needed to get 95 K1500 Burb DD ready.
Yesterday I drilled and tapped the heater fitting and added repair fitting to rear evaporator on the 95 burb I'm redoing. Heater fitting was the third one I've done so it was not bad.
The Evap repair had me pulling out...
Leroy's post from 2016 here where he broke the news about Dalton becoming the vendor for GEP castings. No diamond or dotted lines. Dalton's logo is a backwards D and F in a circle. 12555506 is also cast in as shown on Leroy's drawing. Lines and 506 are solid VS the dot matrix of the Navastar...
After a three month wait while Eastern Surplus moved locations, worked through backlog of orders, and Estes taking forever to deliverer we finally have a Dalton foundry 6.5 Optimizer on the engine stand. After the hand pick and running video charge with freight to Jacksonville we are @ almost...
Hi my name is Jaydee and I'm an addict. I'm hooked on GMT-400. We have 6 OBS I obsess over.
1993 Suburban K2500 5.7 daily driver for now. We have a 6BT donor truck on the back burner.
1994 SL GMC Suburban K2500 5.7 run and drive parts truck
1995 LS Suburban K1500 5.7 future daily driver...