Search results

Thanks Mike

Thanks Mike

I have blue tooth and the TP, will it work for the transmission? I'm not that computer skilled either,but my son is.thTs how I know what the timing is

Ok, as soon as I can. Thanks. Mike

What's the last word?

How does the PCM know to down shift? Fuel pedal, map sensor, speed sensor? How do I check codes for transmission? OB2 connection, does a regular code reader work? Thanks. Mike

I'll look at pedal make sure it goes all the way down. Are there any other sensors besides the pedal that controll the kickdown. Thanks. Mike

Can't drop from OD to 3, shift cable is jamed. It shifts from PRND no problem, I pulled the cable off trans and trans goes threw all gears, PRND321. I bought a new cable just haven't had a chance to install it, it's still cold outside in New york.

I tried yesterday, going up a hill , 45-50 wot it wouldn't down shift out of overdrive , barely made 50 empty. Engine seems to run good though. I know it's not a power house but it should be better than this. My toyota corolla 1.8l with no turbo has more power than this. Is there any...

Hi: Guys, I finally got around to I stalling fuel pressure gauge and boost gauge ,glow shift gauges. It's been too cold here to work outside. Fuel psi at an idle is 10psi at wot is 4.5-5 psi. Boost at idle is 0 at wot is 10psi then drops off as truck shifts up to about 5-7 psi boost. Not...

Trans and indicator are correct

Yes, i think so, like every other automatic transmission Yes, I can move the shift lever through PRNR. But not 321 i think shift cable is jamed. I pulled cable off transmission and trans shift's through all gears but not cable. Not sure about throttle pedal

Yes ,I concur

I goes into PRND but won't go into 321 cable is stops at that point, i too cable off trans t, trans shifts finr

I replaced the hoses under the intake, had a clear hose , thought about air. I have to get a better piece of clear hose , it seemed to get soft when engine got hot. New injectors, timings -0.75 , compresion not sure of, kept getting different results, not great gauges

At the T bleed line on the front of the engine

I think it kicks down by the computer. But not sure . Thanks Mike

I only see 1 cable going to transmission, the gear selector cable. PRND321

There is some shaft play, ill try tomorrow to get some pics