Search results

Hey guys, Well I guess its time to bite the bullet and replace my IP, I am looking for any recommendations for a good rebuilt pump and where to find one. I have found one at Rock Auto rebuilt by Standard Motor Products but I know nothing about their quality. Or should I go with a rebuilt from...

Quick update: I just took a drive to the store and the speedometer and tach jump around only while in drive not in neutral or park, it seems to be worse when I press on the accelerator after turning a corner or after breaking or stopping and getting back up to speed, while cruising it seems to...

Hey guys, haven't been on here for a while. My question is today while sitting at a stop light my truck's speedometer and tachometer were hopping around, the speedometer more than the tach, the speedometer was hopping around at about the 15 mph mark while not moving and the idle seemed a little...

Where in the vehicle do i find the regulator is it part of the alternator or is it seperate, do I need to replace the alternator to replace the regulator?

Hey guys today while driving i noticed my battery light flashing and my amp gauge read about 16-17amps for about 30 secs then went back to normal , it did this off and on while driving, staying on for only a few secs then droppiung to normal again. Any ideas as to what is causing the surges...

How do you remedy this? Is there something I need to be aware of while replacing the WP? Do I just use new anerobic sealer when im putting it all back together or does the aluminum timing cover have to come off?

I got my info from the Rock Auto website: http://www.rockauto.com/catalog/moreinfo.php?pk=1793490

handcannon, Hayden's sever duty clutch is supposed to come on at 170*, you probablly got a lemon, you should of returnned for another, rather than go with heath overpriced stuff. bk95td do you mean the backing plate, or the plate behind that?

Do you recommend the Hayden brand severe duty clutch?

If I am going to do this I will upgrade the fan at the same time so, I think I will go with the 2000 HO WP (providing it definately fits the '94, I don't wanna have to return an order). I found all of these thru Amazon for less than $250 w/ free shipping, bosch 99159 HO wp $76.39, acdelco...

Ok, I let the engine heat up and the leak showed on the ground, but when I popped the hood, and inspected the quick disconnect, no leak there :( ,so I guess I am back to having to replace the water pump, I have been trying to get an inspection mirror down on the bottom side of the pump to see if...

Would this only leak after the engine was warm enough to open the T-stat? Ok I just saw your pics with the barb fitting , Thank you very nmuch for the info, will try to let my engine warm up, to see if this is the culprit, will let you know asap.

Thanks for the replies guys and Merry Christmas!!

Hey again guys, Ok here's my problem: My truck has developed a coolant leak that from the bottomm of the truck is dripping from between the harmonic balancer and the oil pan, could it be my water pump, or water pump gasket or the backing plate gasket, or could it be something else? My truck...

Ah ok thanks Aces, I have the single T-stat setup, and I just replaced my T-stat with a new 195* one from Autozone, I will have to try and find a GM OEM T-stat, any suggestions on where to get one for a good price? Do you happen to know the part# for the '94 GM T-stat? I also will flush my...

Hey guys, new problem today. I got up this morning and started up the truck, and let her warm up, but after letting her warmup, I have no heat in the cab, just cold air blowing. I dont see any water leaking under the passenger side dash, and my Temp gauge shows it is running normal, no...

Ok I think I got it fixed. The wire coming from the alternator was only 10awg, so I replaced it with a 4awg, and when doing so found the allternator post was loose. So I took that off and took it apart, and cleaned up the contact points on the spindle, and tightened up the nut to the alternator...

Guys thanks again for the responses. I will have to get one of those battery testers from harbor freight and keep it on me. Franko thanks for the wire gauge chart. I am currently running ProStart Platinums from Pep Boys, they have 3yr warranty and road side assistance, replaced them about 3...

Thanks for the advice WarWagon, I will try and get those thing checked out tommorrow, and take it by Pep Boys for a charging system /batt check on monday.

Franko i have not changed the postive cable to the alternator, what size is recommended? JMJnet and bk95td how do I load test my batteries? I will check my batt cables to see if there is any bulging or white powder corrosion. The tach seems to move smoothly with acceleration and decelaeration...