94 extended cab light duty 2500. This truck has the optimizer 6500 it with absolutely no blow by. The 4l80E has just recently been rebuilt and works great. The trans probably has 1500 miles on it since the rebuild. I installed the 3” down pipe with 2.5” crossover. I have done the fuel pump relay...
I’m rebuilding a 6.5 for a guy and I think the main bolts should be replaced. Aren’t they tty bolts? I can’t seem to find replacements. I know the best thing to do would be install studs be he’s not going to put out $400 for a set. Anyone know where a stock set can be found? Thanks guys
So I’ve finally got my truck starting good, running good and shifting good for a mostly stock truck. I think the Teds trucks optimizer is going to last me a long time. I’ve got about 1500 miles on it and the oil is still clean and no blow by so I think it’s time to get it to where I need it. I...
So I pulled the 6.5 because of low oil pressure and tore it down. All the bearings are into the copper so there's that but the three center main webs are cracked at the outer main bolt holes. I have done some reading on repairing this with the lock n stitch inserts and a few people are all about...
So my truck is a vin S but the engine is either from an F or the intake is because it has no egr valve but it still has the solenoids which aren’t working properly. I’d love to get a custom chip to eliminate the whole vac system but at this point money doesn’t allow so I am thinking for now just...
So a little background first which isn't much but I bought this truck back in the summer with issues it needed injectors, a new crossover pipe, valve covers resealed, boost solenoid, lift pump not working etc. When I had the drivers side valve cover off I seen a drop of coolant in the oil just...
Hi all, first time posting long time reader. I have just got the lubrication specialist oil cooler kit for my truck and began installing. I am sure somewhere someone has posted pics of their install but I sure can't find the thread. Mainly I'd like to know where on the motor mount I am supposed...