Search results

Only 380 but we do it about 6 times a year from Chicago to Trego Wisconsin.

OK thanks a lot guys just doing as much research as I can to source both quality and affordability for the injectors I don't really want to spend 600 on a set of new injectors as I don't really have to much cash just lying around. I'm going to search again and see if there is a how to on...

I was just curious if anyone has ever used the ssd fuel miser fuel injectors. they seem like a good price just wondering if the quality is there as well. Thanks for any input guys.

Thank you all for your feedback I'm thinking my tstat is screwed I really don't want to get out there and do it now too damn cold high of 11 today doesn't seem like fun right now but guess I got to do it thanks again everyone.

I was just curious if anyone has a cold weather grill cover for their rig that they use when it is below 20 degrees Fahrenheit. Cause lately it has been colder than that in the Midwest and my truck just does not blow real hot air. My temp gauge is reading fine but when I stop the temp drops...

Sounds like you got yourself a keeper.

Glad everything went through the rigorous wife test and passed first time my wife drove my truck was the last time she drove it as well she said its too loud and too big she doesn't like it. On the other hand my 4 year old daughter loves everything about it and told me I can never get rid of it...

Slim shady you ain't lyin' it was a bit challenging holding the box where I needed it ( over my head) cause luckily I have access to a lift also. But it really all went well and I believe that without this forum it would have taken me a bit longer after trial and error but I would have gotten it...

Yea I guess there isn't thanks for your insight as well I'm sure this will be helpful to someone in the future. That might have been part of my problem as well I didn't have a 1 5/16 wrench and wasn't about to go buy one just for this job. Its easy to be cheap when there isn't a whole lot of...

Big t idk how the suburban frames or radiator support is but I couldn't get a wrench on the pitman arm bolt while the steering box was still attached to frame just didn't seem like enough room that's why I used 2×4 to support it and ratchet strapped it to the frame.

OK thanks guys I was just curious cause it claimed to clean in both sides of engine fuel side and oil side if you buy that "package". I do have to replace injectors and glow plugs but just don't have the funds right now which sucks. Construction is real slow in Chicago. Thanks for the replies guys.

Thanks dka99burb. I took both wheels off took both tie rods out. Disconnected pitman arm and idler arm took out link unbolted steering box shifted box up and toward engine supported the box with small piece of 2×4 ratchet strapped box to frame used crescent with big ass breaker bar from front of...

Hot shots secret if so some insight would be great if it actually helps at all thanks. Hotshotsecret.com

I did my pitman arm today an it was a pain in the arse. But I would have to say without searching for other peoples tips and tricks I would not have done this as quickly as I thought did. Only two hours and all data says an hour and a half and they say nothing about removing steering box. So I...

Sounds awesome bison I do the same thing with leaving cap loose and damn things always reseats itself I'm going to do this tomorrow thanks for the heads up.

As would I.

It will be a little bit till i get some pics of the vega with all the wifes crap now in the garage ( she thinks its a storage place) but i will definitely get some pics up here soon. Thanks everyone

Hows it going everyone im new here to the truck stop and just wanted to say hey.