Search results

i have a jumpy idles while driving going down hill? what are the possibilites of it being? i hope not my ip

Anyone got a working pmd/fsd i could borrow/rent i cover shipping if needed cant afford anything much more than that. help

I was driving the truck yesterday pulled a trailer shut it off started it back up a few times got home let it sit for 4 hours or so and now it won't start not a spit or sputter from it. It gave me no warning signs earlier in the day, did some basic checks everything seems fine any ideas about no...

i am having trouble with my brake lights now working all the time when i press the brake, does some one have a wire diagram for the switch? everything elese works just not the brake lights, so the switch sould still be good? i have no trouble getting out of park or shutting of the cruise by...

where is the sensor at that triggers that light, mine came on i put fluid in it but its still on

ok, so while out tonight my wife lost the brakes on the truck when the tow truck got it home (after dark of course) i look the push rod from the brake pedal to teh firewall/master cylinder was jus hanging freely not connected to the fire wall in any way, anyone have pics or a diagram of the...

my front axle need need some bearings replaced, how hard is it anyone have pics of one being taken apart?

looking for injector pump harness help, does it matter what wires go where on the injector pump harness to the ip? black and red wires/

i waslookin undermy truck and foundout my problem with my 4x4, where my front driveshaft enters the front diff, the bearing is gone i have a lot of play. is there a write up on fixing the bearing and what is that partcalled so i can get a new one and how hard is it to replace?

my wife tried to take the truck to town but it didn't start so i took a look at it the next day poped the hood and saw a rat run off the top of the engine, now i cant get it to start its cranking good its been plugged in. i dont think its getting gas, the lift pump turns on, i have fuel at...

my van seemstorun rich(i think we can smell gas when she idles for a while) would 02 sesors fix it? the van also randomly stalls at low speeds/stopping mostly on rougher roads. 1996 e-150 351 5.8L 130,000 auto

i work on my boat trailer wire harness fixing it and found out my brake lights dont always come on, sometimes they work fine and others dont work at all, or the flash for a second and turn right off. Bad stoplight switch? if yes how hard is it, it look like lots of fun...lol

i have a black plastic thing on my altenator cable to battery, is it anything more than a connecter?

can i just replace part of my hard brake line or do i need to replace all of it?

last week a friend came over and said my brake lghts were on so i went out and investigated... we looked and found the the 7-way trailer connecter was smoking so i disconnted... brake lights went off no more problems? now my passenger side curtosey light under the dash is starting to come...

i replaced my condenser, drier and lines today vacumed it out and refilled it. my compresor is always running, its that normal? i couldnt get any new switches by today but will replace them soon as i get them, and the wires to my comp clutch are going bad i think if i play with them the comp...

my vacum pumphas died well the pulley has szied , the pulley was hitting the vacum pump body, what is the best route to go with a stock truck, id go vacum pump, but what if the pulley is unusable, no one has one avlaible. can i run the short belt without the vacum pump for now?

i got out of work tonight, got in the truck did the normal thing turned the key to start and got a click/clunk and nothing else. the starter didnt even try and move i just hera a little clunk type noise from up front. everything else seems to work just fine just no atempt from the starter

when the ac system wants 2lbs of 134 that means 32 oz -16oz to a pund?

i am trying to disconect my ac lines from my condenser but with no luck i have used a lot of force on the connectors but they wont budge am i missing anything?