Search results

Well I need everything for the front brakes, rotors pads calipers and wheel bearings. So I get everything off and knock the wheel studs out, go to put them in the rotor and wheel bearing and notice there is no splines on the bearing. I still knocked them in and they seem pretty tight but with...

I'm sure this has been discussed over and over but I'd like to put my own 2 sense in. I have finally finished the project which also included new injectors and glow plugs. At first I only had the turbo, injectors and glow plugs. Everything went a lot smoother then I expected, honestly I was...

Finally received my att and figured while I'm in there I'll do the injectors and glow plugs. So I've got the turbo off and I have a couple of questions. 1. When installing the last injector, is it ok to install the cap before throwing the injector in or do I have to do it once the injector is...

It all started out with none of my lights working in the rear so I relocated the ground and the brake light and blinkers came back only. So i checked the fuses and replaced the blown 20 amp fuse and the reverse lights came back. The only ones that dont work are the tail lights for running at...

I just ordered an ATT and I'm very excited. Anything I'll need to install it? And my other question is are guys running the stock lift pumps with these or should I upgrade? Thanks

I went out to my truck a few weeks ago and saw a couple drips of oil, not thinking much of it. A day or to went by and I went to change my oil and noticed a little crack in the front diff housing. Question is can anything be done? I'm sure I'm going to have to replace the housing. Truck is a...

hi everyone making an introduction here, ive been searching on this forum for a couple months now after i purcharsed my first diesel. Its a 1994 gmc 2500 with obviously a 6.5 in it. The truck has 168000 miles on it, its a 4wd truck with the 4l80e and 3.42 gears. A little background, when...