Search results

Welcome to TTS JD

Yeah, I had installed 4” over Rancho shocks but now am ready to drop back down the front end, readjust the torsion bar adjustment bolts. Get it back to factory ride height. After I get the truck tires back on the floor I’ll drop the front then with the shocks still not fastened at the lower...

I bought new stock length Monroe front shock absorbers. Attached the top of the shock to the bracket. With no front wheels/tires on the truck, jack stands under the frame, the length of the shock is still at least an inch short of being able to install the bolt through the lower shock to...

Post up the part numbers, or a picture of them, never know what someone in here might have lurking in their stash. Welcome to TTS gogoburger

Welcome to the TTS Sophie. Do You currently have a pickup/truck ? We love pics too.

You might need a few more posts before an add can be placed, according to the rules of the site. Are both these engines RH rotation ? Sometimes when twin engines is run in a boat application, one engine spins clockwise and the other CCW. Welcome to TTS Dieseljet.

Ball joint installation devices, using the weight of the wehicle as a sort if a press and the hammer to help persuade it to bottom. And RH side us done except torque the lower balling, book says wait until wheel is attached and on the floor before torquing that snut. And new center carrier...

New NAPA FLEET service ball joints dont fit. Upper dont fit within the U bend and lower is too small of an OD for the bore. Damnit. I could go to oriellys and possibly get units that fit, except for, I want parts that last even if I dont. 😬🤷🏼😹😹😹 Okay, off with the drive shaft. Remind me to first...

Ball joints. Screwed up and ground the rivet heads just a little too far , then could not get them to budge to get a sight of the corcular imprint. Ended it by pulling the upper control arm. Heaven forbid, I hope to get it back on close enough to get it about four miles to the alignment shop...

Great to see You wondering the hallways once again.

Welcome to TTS Matt C.

Welcome to TTS AIHead. Towards the top RH side of the page, little lightening bolt emblem, tap or click that. Scroll to the bottom of the page. IDK what all them things are but maybe those can help You get on the road.

Its just a solenoid inside the transmission pan. Easy enough to change out. I once had to do one on my 1987 K1500, twenty below and in a snow drift. It was an easy enough task but that snow and cold was not a nice situation. That was on a new reman transmission. The co. Sent over transmission...

Got the side step all rigged and mounted. It is solid, more solid than I imagined it ever could be. Absolutely no wiggle or give.

The guy I bought that from had a healthy bit of knowledge on the 6.5 platform. He has bought from Quadstar and Leroy Diesel. I showed him some of the uprated items on my truck that I had picked off from the forum, he has never heard about thetruckstop.us I sent him the web addy. We will see if...

The manifold. And no better storage place than on the old engine thats hanging out on the engine stand.

Any time any 6.5 components comes available in this area, better grab them up. There’s not a lot of them around.

Picking up the facebook lower intake today. The people what has them lives in Forsyth, about 50 miles to the west. They are coming over for the horse races and said theyd bring it over to Me. They had the manifolds, one for the F series engines and the other with the fixture in the middle where...

I also see that both of those liwer intake manifolds keeps popping up on facebook market place in this area. I’m tempted to send her another message telling her my circumstances has changed and I am once again interested in making that purchase. Might never ever need it but it would be here just...