Search results

No, this portion of Your statement from that previous posting. the truck moved so I can get the pretty car in the garage before this new storm hits in a couple of hours. We would like to see what that pretty car looks like. 😹😹😹

I have a lower intake with an upper intake bolt hole busted out. I will, someday, get out the aluminum arc rod that I use, and the oxy/acetylene torch, knock off a fair amount of the flux from the rod and play with building that bolt flange back out then drilling and tapping new threads through...

This new pretty car statement.

Take it to a maw and pop body shop. Old timers knows the fine points of hinge adjustments.

If You have a DC ark welder, get some aluminum arc rod and do some practicing. https://ramweldingsupply.com/p/harris-aluminum-arc-electrode-per-lb/

I have the opportunity to purchase two 6.5 lower intake manifolds for $80.00 each.located near 50 miles to the west. I messaged the people but then had to back out due to one of the cats needing some vetting. If anyone is interested I can pick them up then postage them off to you. Probably cant...

I was give a case W9 loader. Engine was seized. Pulled injectors, knocker loose into each cylinder. It tirned over a 1/4 turn after about a week. Its a four cylinder. Valve stems is rusted into the guides. I got back to work and never had a chance to finish getting the hood removed(cab and fuel...

And so, with one new faulty injector, it is a good plan to test every injector before installation, YES ? ? ? ?

@MarvinWoodie Welcome to thetruckstop. I know I’m a bit late but I’m curious if You got Your alternator wiring figured out.

BUMP

And most likely the parts store dont have that. Is what I found is all the parts stores over here had in stock is the SAE 30R4. I asked about 30R9 and it was the doe in the headlamps glare. If You have to order in the R9 hose and it is going to be a while on postage, install the new R4 hose and...

Is that GPS guided ? ? ? ?

Pull it then drop the pan, inspect them main webs before dolling out that cash.

Appears some new hose is in order.

Power steering or transmission cooler pipes ?

IIRC there is a buss bar on the drivers side way up under the dash that I think has some grounding wires plugged into it.

Yup, YES, at what @dbrannon79 said. Do You have any pics of Your vehicle that You could share ?

He probably wasnt thinking. If he was thinking it most likely was how cool that wood grain wheel would look in his DD truck, or, how much he could get for it on fleeebay.

I’m not sure what type of a pump the Walbro is. If its a gear type pump then a snubber should be used or else there is a possibility it could damage tge sending unit.