Search results

Expires 6/13/25 301375547253246176

Highest bidder so far!

I think it was taken care of pretty well. I had to replace a floor pan and a cab corner, and one of the fenders is a bit rusty, but overall it’s pretty solid. It has a dealership tag on the tailgate from a local dealership, so I’m pretty sure it’s been around here its whole life.

I know at least one of you had a side wager going that this would eventually happen. Go collect your winnings, smarty.

Well that sucks to hear. I guess I’ll have to save up for Kryptonite stuff for when the time comes to replace them.

Finally got the front suspension all together. To finish the front diff I had to buy a new adjuster and tool for tightening it. I tried removing the driver side adjuster with a hammer and drift punch. That didn’t go well - it mushroomed the tabs so they dug into the bore of the diff housing. I...

No worries, we've all had those moments, it certainly wasn't worth blasting you over 🙂

The truck was delivered to my dad’s house today. Now he just needs to insure and register it. There’s a local car show on May 6th he’s planning to take it to, so he’ll have to get that stuff done before then.

Last night the truck left the property for the first time in 5 years. My brother did an alignment today. The numbers look good. He played with the camber to compensate for road crown and said it drives down the road really nice. “Really tight” he called it….it better with all the new parts...

That looks like a great space. I’d love to have a bumpout with machining tools like that one day. Well done.

I just used some 4-1/2” paint and rust stripping wheels on my angle grinder. https://a.co/d/fZ2EwKE I then cleaned them with some degreaser. Once dry, I sprayed them with self-etching primer. Top coat is semi gloss Rustoleum.

Yesterday I stripped and painted the wiper arms and then I installed them today. Much better than when they were flaking paint.

Yeah, 2”.

I have to say this before Husker gets it in: NOT the skid steer 😂

Today my brother and I found a pretty good hood at the junkyard for the truck. The original one had a bunch of dents and rust that really detracted from the overall truck. I took off the tires that were on the wheels and mounted some 265/75s. I also mounted some 2” spacers in the rear so...

I started reassembling the front diff tonight. It took over an hour just to get the 2 pinion races installed in the case with the tools I had (both real tools and improvised). Tomorrow night I should be able to make some real progress now that this step is done.

Are you buying your glows from the same place every time? Any chance they’re counterfeit ACs?

Yesterday I continued front suspension assembly. I got the bushings and lower ball joints all pressed in. After wire wheeling fasteners I started installing parts. The last thing I did was start to install the Mevotech TTX upper ball joints. I noticed there was a raised logo on the surface that...

It was a series of 5 videos. I only watched the last 3, but this link should be the playlist for all 5. https://youtube.com/playlist?list=PLGgqTh7gBpU1D9CmpUj2eMZisShEPBXXX&si=FhST5r96pBL9q2Uv

I got the box finished up today. I decided to watch a video on YouTube to get some tips on installing the balls and that helped a lot - one tip I used was to smear grease on the inside of the rack to help hold the balls in place, the other tip was to use a piece of 3/8 fuel hose to help hold the...