• Welcome to The Truck Stop! We see you haven't REGISTERED yet.

    Your truck knowledge is missing!
    • Registration is FREE , all we need is your birthday and email. (We don't share ANY data with ANYONE)
    • We have tons of knowledge here for your diesel truck!
    • Post your own topics and reply to existing threads to help others out!
    • NO ADS! The site is fully functional and ad free!
    CLICK HERE TO REGISTER!

    Problems registering? Click here to contact us!

    Already registered, but need a PASSWORD RESET? CLICK HERE TO RESET YOUR PASSWORD!

Search results

  1. woodchuck2

    my 400 6.6

    I have owned several of them, like said the bottom ends are weak. Ah hell the whole engine IMO is weak. They are tough as they will take a beating but all the small blocks and FE's i have owned would out perform the M engine hands down. Another tough engine that i hate is the ole 300 six, tough...
  2. woodchuck2

    Think I blew a speaker.

    At least your radio is working. The reman junker the stealer through in it has started screwing up. The stock radios have the auto-volume that adjust itself with road noise and such. Well it worked properly for the 1st couple weeks but now it work opposite of its design. the radio will play...
  3. woodchuck2

    air bag lite on

    You may need to check for codes in the BCM or SRS modules. May be just a power loss code or something of that nature. Try driving it a bit while starting and turning it off intermittenly to register some key cycles and the light may go out too. I dont know anything about the Fords but i would...
  4. woodchuck2

    LBZ Extended warranty?

    I got the GMPP 3yr/75k bumper to bumper shits with $0 deductable, towing and car rental. And i use it!!! I have had the dealer replace tranny cooler lines, 2 intermediate shafts, 1 radio, and the glow plug module so far. The intermediate shaft is clunking again as usual and the radio is screwing...
  5. woodchuck2

    Heavy load for a 2500HD LBZ?

    I bought 2 front axles out of 6X6's like those for my S-10 project. Each axle alone with wheels weigh around 950-1k each. Those trucks are heavy!!!
  6. woodchuck2

    Snow season is coming, are you ready?

    Yep, plugged into the cruise control fuse for keyed power. Thank you though.
  7. woodchuck2

    Snow season is coming, are you ready?

    I checked all my fuses, cleaned all connections and grounds and load tested the connections. I had power at the C,F,G terminals on the #1 harness at the module. All is good. I jumped the relay and it worked properly but still no power to the controller. I gave up and called the fella who...
Back
Top