Search results

I must have forgot to push send

Sorry, what does that button look like?

Okay I went out and took pics …cuz I’m sure people are wondering what the heck is he talking about…I’m sure it’s a one in 300,000,000 million chance this would happen (I better play mega millions) …I will post pics but don’t know what order they will download, pic 1 should show two mating parts...

I’ll get a picture in the morning…I was able to finally get the tab or tang out of the screw hole so the Heli coil stayed in .. I tried picking it out and finally took a thin straight blade screw driver and smacked it screw driver and it came loose, that’s when I seen it was a heli coil…so I was...

Update…alright I purchased Leroy Diesel swollen glow plug removal tool and it worked flawlessly, I wasted some time trying other methods and no way would any other suggestion would have worked..and yes they were 11G …so I finally got fuel to all the injectors ( almost gave up until I reread some...

Hit a little snag today, yesterday woke up and 10 degree wind chill and snowing so didn’t work on the truck….today bolted and torqued the lower intake down and removed 6 glow plugs but the other 2 are swelled up on the passenger side.. I forgot that I had left that side plugged in so then I put...

I will put the solenoid back together..it was working and if it doesn’t work I’ll get new one along with a Pmd the 2 I have one has a resistor and one doesn’t and heat sink bolted to upper intake …I miss printed I only have the lower intake with 4 bolts attached waiting on fuel to the injectors...

Thanks that eases my mind knowing it takes a lot of cranking…and thanks for warning about runaway, the engine is pretty stripped down with upper intake 4 bolts holding it and a 2x12 x12” ready in case…once it gets fuel I will start adding parts if I hear it run starting with harmonic balancer.

I pulled the guts on the fuel solenoid while struggling with air in the fuel line…do I still need to leave the key on?

Thanks.. I almost pulled the glow plugs so turning the motor over would be easier when screwing in the timing gear but just went for 24mm on the balancer..the question that came to my mind since I don’t have the glow plugs attached to the wire am I at risk of any damage didn’t hook them up...

Thanks I’ll try that tomorrow…glad to know that It’s not electronic

Okay replace the seal on the injection pump and put it back on the truck yesterday…no more river in the valley and no more air in the clear return line…BIG shout out for the help on identifying the leak and also the injection pump rebuild kit…My eyes are tired of reading..can anyone tell me why...

Thank you Will L. Well explained…just looking at the picture I’m guessing DB is mechanical and DS is electronic…I get it now

I know that is confusing me…I thought seen ds4 and also thought there was db4 but not sure…is there a db4 and ds4 ?

Well got my injection pump rebuild seal gasket kit…whoa intimidating soo many parts..thanks MrMarty51 for the link has the keyhole gasket (seal) in the kit…pulled the injection pump this afternoon…and also thanks to Paveltolz for pointing me in the right direction, I was at a loss thinking how...

Perfect…thanks so much

Alright holding off on ordering the DB4 injection pump rebuild kit 33702 because I fail to see the seal I think I need..no way I’m going to rebuild the pump but looking to replace what I think is leaking…posting a pic of the seal that might be leaking and the rebuild kit…am I missing something??

Thanks for looking. I did see some for around $55-$60 bucks and they want $20 for shipping and the weight of the package 1lb….they call them aftermarket which probably most are…which I would go with but while looking at the pictures I don’t see any that resembles that gasket (seal)I thought it...

Very much appreciated…thank you for the time. Sincerely panran

Towed the truck to Colorado finally and now can work on it again. Stanadyne DB4 injection pump never could stop the bubbles in return line but finally tracked down the source after removing the lower intake a dozen times. Replaced lines to and from ffm and also replaced ffm housing because the...