Search results

Sometimes I am a little slow…but you are saying the bracket is already in the picture..that would make it less stressful cause I can’t seem to recognize part 21 in the picture

I’m gonna put that info in my files…valuable info Gladulator thanks

Great information…thank you. Does anyone have a 3D view of the bracket so I can search online…where I’m at in Colorado there are not as many recycle yards as in Illinois

1995 dually

I looked at an old picture and see where the brace goes…but the diagram confuses me, because it shows a bolt going in the back of the alternator (and there is a threaded hole) but I don’t have a bracket there, or are 2 okay?

Sorry adding picture 2

And thanks for all the help and advice in the past. I’m making a list for parts to put together the front section of the engine. I’m going to get dayco hb, and hb pulley, belt and tensioner, band clamp for exhaust…then some other parts down the line. But I need to ask for help again…when I...

Now you got me second guessing about aftermarket harnesses…..in the so called instructions they sent it seems to show fusible links in line…I’ll add a pic

Thanks, I was just going to ask that question just because of the difference between the wire gauge..the orange wire looks about 12gauge and the pigtail about 14 or 16gauge.

Thanks..some of the wiring is hacked up…and don’t have the heat shields.. I get the hookup for the right and left side but was wondering about the wire that hooks up to the power from the ignition and triggers the glow plug heat cycle and what color, because the existing plastic wire loom cover...

Sorry forgot to size pics

Thank you to everyone for help, tips, and feedback…the engine does run…what a relief! Now start to get it roadworthy. But I do have a question or more in need of advice. When I started the engine I could only plug 6 glow plugs in so there was a little rough start and a lot of white smoke out the...

Sorry for double copy….accidentally

Good morning and thanks. When I replaced the seal that houses the linkage for stepper motor I tried moving it by finger pressure and it didn’t move (before attaching stepper motor) so I took it back off and it moved freely but when I reattached it was too hard to move… so I wasn’t sure if it was...

Happy New Year to all….update reinstalled IP , fuel lines, lower intake and cranked it up and it appears to be leaking more…can’t really see exactly where so pulled it back out again and it looks like the new key shaped seal is holding, but looks like the linkage that the stepper motor attaches...

Merry Christmas to all!!!

Canadian whiskey I hear is the best…closest I came to Canada was Gran Marais Minnesota I lived in Duluth Minnesota for a few years in the middle 80’s

Yeah liquor makes me blackout after 2 or 3 …but beer makes me a jolly good fellow and in heaven there is no beer….my wife has afib and stopped drinking and weed…Merry Christmas

Thank you and Happy Holidays!! Too All

I’ll try that…celebrated with a little too much beer last night, still waking up…I probably won’t know the result until it’s on and pressurized…Thanks for helping