Search results

Sure. The mods are in this PDF.

I stole the transmission I built for this truck to put in my 94 Dually. I reasoned it made more sense for the way overbuilt trans to be in my primary tow pig, rather than this rig, especially considering the build levels of the engines that each will have, at least to start. This is the trans...

Another one. Expires on 2/14/25. 290836302253246176

My gut feeling is their catalog isn’t correct and they can’t actually get the tone ring. The part I don’t get is why the order hasn’t been automatically cancelled though. Not a big deal, it’s just curious.

Oh, and it’s been 2 weeks since I ordered the speedometer tone ring from Jegs and I haven’t heard anything yet, so I’ll have to call them this week. I’m guessing I’ll just be putting the original one on with Loctite.

I received the seal kit yesterday. Here are the 3 shift shaft seals I have now. Left to right are: New from kit, New all the catalogs call for (actually for electric shift) and then the new one from the kit. It’s a match. Here’s a close-up of the original seal: Here’s a close-up of...

Yeah, unfortunately Super Steer discontinued it recently. Sad. However, word is that Kryptonite is currently working on a new idler arm support.

New one. Expires 2/7/25. Should come in handy for a Valentine's gift for that special someone. Nothing says, "I love you" like a new set of brake pads. 289932399253246176

That work station is super cool! I haven't seen one of those before. You're getting a nice collection of tools/equipment.

I was able to find a number on the old seal, but it didn't help me with cross-referencing. I'm not sure the goons at the local Napa would be very helpful in trying to cross-refence this seal - it used to be Napa was where you went for better parts and service around here, but it seems they've...

Yeah, I just used a 2-jaw puller to remove it. It came off pretty easily. There's another version of the tone ring that has a smooth bore instead of the splined one like mine - I imagine that one is tougher to remove. The smooth bore tone ring is a little more readily available, but...

Today I got the transfer case assembled….at least as much as I can. Here’s what I did for the case saver mod: Well first, here’s the problem - the oil pump is held stationary with this stamped sheet metal bracket that is captured by bosses in the aluminum case. In theory it’s a fine setup...

Awesome. I’d love to have a machine tool room some day.

Looks like a great room. I can’t recall, what did you say you’re using it for?

This is a BW4401. Parts are fairly rare. There’s a metal tab on the oil pump that holds the housing stationary while the shaft rotates inside of it. That tab can either rub a groove in the case and/or the case rubs the end of the tab off - either way, the housing then rotates so it is no longer...

You got me thinking about the shifter guides……while they look good, they may be getting brittle with age, so I found a place that sells them and I ordered a set.

Chain looks fine and much to my surprise so did the guides on the shift forks. The case and oil pump anchor tab didn’t even have much wear, so this must have been a replacement unit at some point because the truck has over 200,000 miles. I’m going to do a case saver mod to prevent future damage.

2008 trans that was first built for Frankensquare is now converted to 4wd and ready for use in this truck. I got the transfer case disassembled, cleaned and inspected. All hard parts are good thankfully. I have new seals on order as well as a new 4wd switch because I was having issues with...

I’ve made some progress on the transmission front. I got the trans from the black truck disassembled so I could harvest the 4wd output shaft. I tore down the trans I built for Frankensquare last year and swapped the output shafts. I reassembled the geartrain and checked clearances - they...

Finally getting back to this one. With the red truck basically finished, I was able to pull this one into the barn again. Today I pulled the front clip off and then yanked the trans and transfer case. I’m coming to realize that when I did the plumbing and wiring I focused more on the...