Search results

OK, gotcha so I can go to any auto parts store and buy a 2000 6.5 water pump (it being the correct high flow pump)??

And his kit uses the GM water pump that flows coolant evenly across both cylinder heads at a rate of something like 48% per side? I know there was an article on MaxxTorque magazine where he was testing pumps that flowed good on the driver's side, but there was a lack of flow on the passenger's...

6.2 turbo, hey my buddy's 94 Suburban could be your electronic pump test truck when we finally get the thing running again. Problem is with all the snow we've had in the past two weeks from the blizzard of '10 we have really been set back as far as working on it because it's outside in my...

I gotta agree and awesome numbers for a 6.5 turbo. I have seen a few of your YouTube videos of the truck and I always knew the 6.5 had potential! That is sweet that it's making it just on fuel too and looking forward to hearing and learning more about what you've got done to it.

Nice install and is that a universal kit or a kit that you can at least get the exact same pipe bends as you have to fit under the 6.5 engine underhood area? Did it cost a lot? I know if you buy any of the 6.5 intercooler kits from some of the diesel sites that it is over $1500, not to say...

I'd be interested in a 4-plunger pump and I don't even own a 6.2 or a truck for that matter. If anything is stopping these engines from getting a good bit more of reliable power it's the injection pump, as it has been discussed plenty of times before. If you are going to be hard pressed to...

Speaking of lowering compression on these engines you can also do it with thicker head gaskets from Cometic, but how well it would handle under 25+ psi boost pressure I don't know. Being that they are thicker you wouldn' get that closer head(s) to block mating surface as usually seen with the...

I do agree that people think very little of them and I do think they did cut corners on building the engine as far as a diesel is concerned. But, the good thing most all your problems or issues can be solved with aftermarket parts. I've been over to Myerstown a few times for work as we had to...

Hey coalroller, do you still have the HX35 turbo you took off to replace with the A-Team turbo? Looks nice, looking forward to seeing your videos on it, and you have a nice truck by the way.

Hey 6.2 turbo, very interesting read on your 6.2 and you have got to have about one of the most modified 6.2 or 6.5 engines around. Where are you located in PA and you plan on pulling at the Buck in Quarryville, PA? That's cool that you want to build the truck for sled pulling as I have to...