Search results

did some welding on the replacement rear bumper for the 93. had this thing for a few years on the 96, but since i'm parting it out, i took it off. it was found on the side of the road on the way to work one day. fell off a dump or cement truck. cut it down, welded in a place for the plate and...

then start a new thread and state what your purpose is. then we can rip into you again.

if i paid for kero or #2, yes. i get this at a much better price. cetane cost 15.00 to treat 250 gallons. that costs .06¢ a gallon better.

okay.......

no it's not. it's being stored in a locomotive. about 4000 gallons left from a 5000 gallon tank. i'm on my 2nd tank. 1st i didn't add cetane and mileage suffered. about 1/2 through this tank.

they didn't know how to drive a dually.

i have a source for sulfur diesel. i add the recommended dose of cetane because it's been sitting a few years. truck runs way better on it. good price too.

need pics. kind of pointless without.

photobucket, once again, sucks! none of the pics show up. sucks about the roommate also. think i'd find another one.

sometimes i place a 55 gallon barrel of diesel on the tailgate and i tighten up until it's slid off. so i removed the crappy and questionable cables, installing strap hinges. they are OEM, offered on the early version trucks. funny how some things, introduced with the new platform, were cutting...

P0335 DTC is set once PCM fails to detect proper sensor operation from crankshaft position sensor. This causes Check Engine Light to be displayed and failsafe mode. P0335 can have a variety of causes: Open or short in wiring harness Poor electrical connections Crankshaft position sensor...

i have one.............

got the front end aligned. rag joint needs replacing, which i'll do and told me about the PS leak from the hydroboost, which i'll take my part to them to put on. almost 300K and none of the parts needed replacing and this was its first FEA. they had to remove the KO plugs.

not sure. couple more pics:

Just a project right now, sitting in the driveway, in my way. Would like to get it running before I sell it or I could part it out. LMK. Asking $1,500.00 as is. Bought in 2000. It was a farm truck in it's previous life and originally had leather. Drove it daily until fuel went up so I bought a...

no. the problem won't go away. just might not notice it.

here's what i got:

i believe i have one on my 96. it's a single stat. i can take a pic if interested.

trying to find a shop who really knows these diesel engines is the same as looking for that needle in a haystack. JB Weld is a temp fix at best: just to get you home. if a shop suggested it to me(same thing for not using a perm fix like step keyway), i would be calling the tow truck to visit...

yes, that port. here's a link to the bypass: http://www.fs2500.com/