Search results

That’s what mines doing to. No matter how I adjust everything I can not get it to come out square or pointed slightly backwards. If my spare tire wasn’t under the truck it would probably be easier to make it fit square. I can adjust it to where its really close but I’m forcing it against the...

Do a search on here and there should be many post about this same topic

How long did it take you to figure out the alignment of the exhaust kit? I tried for several hours to get my diamond eye to line up how I wanted when it comes out behind the back tire. It would never look square behind the tire no matter how I adjusted it. For about a month I have been running...

Leroy sells a cheap and easy way to add a fuel pressure gauge if you still have the factory fuel filter installed. And he’s a forum sponsor https://leroydiesel.com/products/leroys-fuel-pressure-tap-fpt/

You should consider letting Twistedsteel Performance coat the condenser for you. Especially since you are in Texas.

Ive always heard to drive it like you stole it or at least hook up to a heavy load for a few miles

At work we are having a terrible time keeping up with the schedules of the projects that we have going right now. A lot of the material and equipment that we used to could get in 7-10 days has now turned into 6-8 weeks a lot of times. Sometimes over 10 weeks. There is no quick ship option for...

You need to put a scanner on it first to read the transmissions codes. Then go from there

I have been running 90 octane ethanol free in the lawnmowers and boats. For the chain saws and weed eaters I buy the 95 octane 1 gallon cans. I have been doing it like this for about 5 years now and haven’t had to tear into any carburetors or replace any fuel lines yet. I sure don’t miss...

Please do a detailed write up on here when you do this

If your local Napa is like mine, they will let you go in the back and start comparing what you have to what they have on the shelf. You could also take it to them and let them measure it up and they should be able to get on their computer and narrow it down for you. I built a homemade car...

It’s dangerous but I’ve done it several times. You migh have to use spring compressors. Some times though you can’t get them out when the spring is in the truck. What I have done several times is use the spring compressors to collapse it and then put a BUNCH of zip ties on it to hold it. Take...

Hey now!.?!?!? Do I need to check my PayPal account for 2 purchases 🤔😉

If you changed the AC Delco balancer out every 100,000 miles you could get 500,000 miles out of the engine for the price of a fluid damper. That’s what has always kept me from buying one. The AC Delco water pump normally cost over 200$ for the right one

I normally just take out the 6 easiest glow plugs and not touch the injectors. With the glow plugs out it’ll spin over really fast. There will be no doubt in your mind when the fuel system is primed. There will be a mist of fuel coming out of the glow plugs hole and blowing over the fenders and...

He still has a website and still selling his stuff. It pops up every now and then on Facebook when somebody is asking a question about one of his products.

Thanks man

Yeah, they would cut as many as I wanted

if you don’t mind scanning it that would be great. I can get our metal shop to cut it out for me. My email is [email protected]

You don’t have another one of them dual alternator brackets that you would sell do you?