Search results

You guys are over thinking it, it's been posted earlier in the thread but I'm not going to make you go back and find it in this 31 page saga, I just gotta tell you, TURBO DRIVE PRESSURE DING DING DING!

Just a Holset HX40 turbo and this device has been installed for awhile.

One more hint.

At the rate we're going we'll have them looking like a 2021 Duramax LOL!😂

Hey Nate, remember this? I can mount it to the front side of the bracket if I feel the need for it along with higher lift pump pressures.

Come on Will you got this, look at all of the pics, you'll figure it out.

Nate, I think you have me beat as fare as after market components under the hood, like the intercooler, fuel pressure regulator, coolant filter and then all of that fancy electrical work. And if we matched entire truck aftermarket components you really got me beat. I wished I had your talent and...

DING DING DING! Will won! it is the fuel return system coming from the rear injectors. The gauge by the master cylinder is for my pre oiler pump with the OEM oil pressure switch along with an adjustable pressure switch. Does everyone know what the component to the right of the fuel return log is?

Well here is some diesel porn for you guys...

Never mind Nate, I found it.

Well I've made some headway in the last week, I'll shoot some pics tomorrow and share my progress with you all. Nate I know you gave me some info on the device you use to control the boost pressure to your Puff Limiter but I can't find it. So tomorrow I'll be plumbing a 3/16" boost line from my...

I looked at the gas one I have and I think the actual module may be the same but the cable end at the motor is different. Before Nate helped me come to my senses I pulled the gas CC unit out of storage. I think the end from a gasser may be able to be modified and fit on the other post on the DB2...

I don't know if they are the same but I snagged one off of a gas truck a couple of weeks ago.

Oh it all came together when you posted it, That's why the pic has the rubber grommet in it, I immediately put the grommet in the cable and figured it out. But I would have probably chased my tail for another day or so without your help, Thanks again.

Daa, why didn't I think of that! So that's why the only two parts in my safe keeping box was the grommet and the clip. Well it's been over a year and a half since I took it apart and my memory isn't what it used to be. Thanks guys!

But you know I have not tried to see that one will work, but my memory is telling me it is different.

No, I have that one, it has the small groove and fits the cruise control cable as far as I can tell. That's the cable shaft on the left when looking at the pictures. But thanks.

Well trying to make some headway on the Burb this weekend. Does anyone have a picture or a part number for the retainer that holds the throttle cable to a DB2 pump? It seems I have lost mine. It's the one on the right side in the photos.

SOLD

There's quit a few of these trucks at the U pull it near me, I just thought I'd install the whole window regulator and just have to figure out how to wire it up. I believe the power window regulator assembly comes with the door lock actuator on it also.