Search results

Hi This is nice results 6.5L :)

Well folks, here is the link to the Intercooler pictures. http://www.thetruckstop.us/forum/showthread.php?35199-My-1994-6-5-intercooler-setup Børge

i forgot to mention how if installed the scoop to the hood. The sccop piece was attached with bodywork glue used instead of welding, and reinforced in the seams with 6mm stinless steel rod glued on the inside of the hood. Børge

Added a cover to protect the Generator from direct moisture. Børge

I bought the hood decals from Ebay. 6.5 DIESEL TURBO GMC CHEVY HOOD DECALS STICKERS C/K (380199124604) Member id prop_kulture Børge

Hi As i promised, here is some pictures from my custom Intercooler project. :) I got me a used, dented hood. Startet to straighten out the hood. Cutted out the piece from the donor hood(Subaru Forester Diesel). After carefully measurments i cutted the hole in the hood. The donor piece...

26034521 lower steering column shaft. 1999 6,5td k-1500 8 LUG.

Hi Take a look at this site, it has been of good use for me many times. http://pinouts.ru/ Børge

Hi Dylly Thats ok, i will collect the pictures and post a thread in the performance forum ? Børge :)

I am not shure, but i think there is bushings also inside the hinges. Børge

Hi Buddy, thanks for replying. I have the GMTD ScanTech, its a good program. Will the TCC lock on deceleration cause any wear on the tranny ? Do you know what is stock advance for this engines (Vin-f). Max fuel on 2100 sounds fine, i guess it makes less smoke also, and run cheaper at lower...

Hi Darkrider. I have a lot more photos if you are interested, that shows from the start how i did the most of the stuff.. Børge

Hi btfarm Thanks for liking it Børge

Hi Buddy Thanks for nice comments. Well the technical shief at Subaru Norway called me "a Norwegian Chip foose" :) I have always wanted to measure the airflow into the scoop, but have not got my hands on a properly tool for that. Right now i am about to replace the turbo, its getting sloppy. i...

Hi Leroy. Thanks Yes you have probably seen it at TDP. I am about to change Turbo soon, and came across some interesting post here about the ATT Turbo, seems to be a nice choice i hope. Mine has been damaged beacause of a faulty Airfilter that let dust\dirt pass into the Turbo. The blades...

Hi I just want to share my ATA setup, i had access to a dented hood to work with, and a damaged hood from a Subaru Forester diesel. I cut out the piece i needed for the scoop, straighten out the test hood, and started fitting the thingies :) I used a ATA cooler from a voyager diesel, i know...

Probably because the fluid is sendt aorund in the system, as with the engine itself, level aint stable until the oil settles..