Search results

Im looking for someone how can verify for me the perch widths and distance from mounting surface to mounting surface on these GMT-400 3/4 and 1 ton trucks. Im told the 1 tons have narrower perchs that the 3/4 tons as well. My truck is 3 hours away from me, and I dont have anyway of getting the...

Correct

Pop bottle, 3/8" fuel line 3-4 feet, 3/8" bolt less than 1/2" in length. Drill a hold in the bottle cap and stuff the line through. Go to your driverside fuel rail using needle nose pliers disconnect, the hose thats on the end of the fuel rail, and then slide off the clamp. Put the...

When using the cummins/nv4500 and an off the shelf upgraded SBC unit your going to have to add an inch or so to the throw rod on the master cylinder to make it work with the Chevy clutch pedal, I've also been advised that, the 2 plastic pop out pins that retain the clutch pedal arent up to the...

Old thread I know but I bought a Millermatic 180 with a cart, the welder its self is less than a year old and supposedly only has 2-3 hours on it. Going to pick it up tommorow, :D $450 I think I did alright.

Same thing I'm getting a new front one made. Jw but what did they quote you for a price for a new one?

Is the worlds fastest Grape over here? Anyone heard from him?

contact RyanB at compD he is the one with the truck your talking about and the one to do that.

I checked there first, they have several listings but only 2 PN#'s as well, I guess worse case scenario if one doesnt work they only cost $50 used but I've got a few weekends before I tackle this, to dig up as much info as I can

Silverado style composite style

Does anyone know if they are all interchangable from 88-98? I need a newer one for my truck I come up with 2 different part numbers for them. I imagine everything beings the same I just concerned about the 6.5 radiator fitment.

Long story...Trying to be a nice neighbor, apparently my parents neighbors are a bunch of meth head and tried baja'ing a dodge shadow, got it stuck and tryed to pull it out with a van. I pull the van out. Then in the process of pulling the Shadow out, my truck fell in a rut left by the van. I...

I've debated getting that painted I may end up getting it done when I find a new bumper:mad2: Thanks for the compliment

scraped and sanded all the old paint from the first paint job off, with it with black a few times, wet sanded it and then buffed them, I'm relatively pleased with them. Time will tell whether or not I like it more than the factory red.

Your going to get tire wear like that of the lifted Fords with the TTB front suspension, most likely you wont even be able to come close to bring the chamber back in to anywhere near stock specs. I realize you dont have a ford but here is a good example of out one of your outcomes will be. I...

Which chemicals are there that wont ruin the plastic?

Not yet, I've got alot of old paint to scrape off from the first paint job. :mad2: Lol

Well after I spent an hour trying to pefectly mask off my brand new GMC emblem, it still came out like crap paint still got where I didnt want it and the dog must of knocked it over when it was in the garage, anyways it came out looking like crap, so I thought there must be a better way, I...

the 4 plunger DB-2, I havent kept up on it in along time since I had decided to go the cummins route, but back in the day when people where making progress at first tinkering with the DS-4 mainly the 5068 it was just thrown out that it would take about 100mm3 to get to 300 rwhp, It doesnt seem...

100mm is said to support about 300 rwhp in the 6.5 platform.