• Welcome to The Truck Stop! We see you haven't REGISTERED yet.

    Your truck knowledge is missing!
    • Registration is FREE , all we need is your birthday and email. (We don't share ANY data with ANYONE)
    • We have tons of knowledge here for your diesel truck!
    • Post your own topics and reply to existing threads to help others out!
    • NO ADS! The site is fully functional and ad free!
    CLICK HERE TO REGISTER!

    Problems registering? Click here to contact us!

    Already registered, but need a PASSWORD RESET? CLICK HERE TO RESET YOUR PASSWORD!

Search results

  1. C

    Codes. Truck won’t move

    This TCM that’s hooked up now come out of his running truck until the motor blew The original TCM from my truck was doing the same thing with codes as his
  2. C

    Codes. Truck won’t move

    This comes back right away. Not even able to cycle the key But no solenoid B now This is getting me frustrated lol
  3. C

    Codes. Truck won’t move

    Solenoid B connected I clear the codes Then they come back
  4. C

    Codes. Truck won’t move

    He’s going to come over later this week when he’s available In the mean time So I turned the ignition on and hooked the scanner I have up This brought up to codes I was able to clear both I have cycled the key off and on and the codes return I have the pan off so not able to...
  5. C

    Codes. Truck won’t move

    Does this one allow you to command the solenoids on and off ?
  6. C

    Codes. Truck won’t move

    I have a friend that has efi live that says he can do it
  7. C

    Codes. Truck won’t move

    Do we know of a scanner that won’t break the bank for this. Or what I need to look for in one. PCS is brand new when the solenoids and internal harness was done Not saying it’s not bad aswell TCM that’s currently in now is one from a friends running truck. I borrowed it a few weeks ago to...
  8. C

    Codes. Truck won’t move

    No readings Red probe on light blue connection. Black probe on truck body
  9. C

    Codes. Truck won’t move

    Correct all connectors are connected. I probbed the red connections on the solenoid plugs
  10. C

    Codes. Truck won’t move

    Ignition On At the pan Red/ black wire. - 4.74volts Light blue. —- 0.86 volts Purple. - 4.22 volts Grey. 4.22 volts
  11. C

    Codes. Truck won’t move

    Yes I still have the pan removed Do you want the connector unplugged at the solenoid and then check voltage with ignition on ?
  12. C

    Codes. Truck won’t move

    What’s the best way to prob them then ?
  13. C

    Codes. Truck won’t move

    This was with both red and grey plugs disconnected
  14. C

    Codes. Truck won’t move

    Red connector. No volts on 22.24.32. with ignition off and on Grey connector No Volts with ignition off 0.09 volts with ignition on. Pin 1,5
  15. C

    Codes. Truck won’t move

    Red connector ?
  16. C

    Codes. Truck won’t move

    Just checked again to make sure had a typo Grey connector. With ignition off Pin 2 and 4 zero Pin 3 12.50 Volts
  17. C

    Codes. Truck won’t move

    Ignition Off Grey connector. Pin 2. 12.50 volts Pin 3. Zero Pin 4. Zero Ignition On Pin 2. 12.26 Volts Pin 3 12.20 volts Pin 4. 12.20 volts
  18. C

    Codes. Truck won’t move

    Yes Not able to clear code Pans off the truck so don’t want to turn ignition on unless I can just have the key in on position to hook scanner up This is the scanner I have
  19. C

    Codes. Truck won’t move

    With the new multi meter. Right at solenoid A I read 5.5ohms. At terminal 22/23 I read 5.6 ohms At terminal l /m. I read 5.5 - 5.6
  20. C

    Codes. Truck won’t move

    Here is the multi meter.
Back
Top