Search results

Do you think the lube will help them from getting stuck until they break in? Also I lap mine like this guy did on his VW, he used oil, 1000 grit then 2000 grit on glass, what do you think about using lapping compound between the upper body and middle washer? You'd just have to be careful and...

better atomization and it has been proven to help mpg in another truck. Take a look here: http://www.thetruckstop.us/forum/showthread.php?33067-Injector-Nozzles

I lapped two of mine yesterday (the leaky ones on the easy side) didn't do the nozzle top but was thinking about it. After installing them one still leaked so I pulled it, re-lapped it and put blue locktite on the threads. Then driving in town probably 10 min into the trip one started tapping...

Well the tapping went away after getting the boost past 5psi twice, weird though. Now I just have to disassemble the leaky ones and lap them

I was flipped the right way, It has since gone away. When I drove it this morning after I brought the boost past 5 psi it hasn't come back since.

I was reading up about rebuilding injectors last night and that is the only thing I forgot to do so I'll be fixing that. How long did it take the tap to go away? It sure is damn loud but only when the engine is revved not when held at a constant temp. I also know which injector it is. I was...

I just put my Bosch Marie nozzles in, popping at 2650-2700 psi. I swear the turbo whistles more now maybe because the engine tone is different. Anyhow I know which injector is tapping, it was torqued correctly to 50 ft lbs. I don't notice the tap until the engine was warmed up and after my...

I just put my Bosch Marie nozzles in, popping at 2650-2700 psi. I swear the turbo whistles more now maybe because the engine tone is different. Anyhow can someone share their secrets on how to fix the leaky injector at the body? I have tried one awhile ago and didn't have luck (with my only...

That was the exact problem, I had read something about bleeding problems a few hours ago and they said make sure the push rod is adjusted right and I had remembered I put it together to allow a "long" push so I knew it was the problem. I went back out adjusted the rod down and WA-LA fresh fluid...

Currently its sitting in the shop because a had a hydro failure yesterday and bleeding this new system is taking all damn day. Its crazy I tried gravity bleeding for an hour, coming back and pumping it and its not getting me anywhere. Just replaced master and slave under warranty..now only if...

well when its hot Low and 1st get tight and harder to shift into, reverse just grinds due to no syncro

both of our trucks have all new clutch hardware, mine is ~5 months old and his is probably ~10 months old. New pressure plate, flywheel, disc, clutch lines, master and slave

I know this one has some cob webs on it but instead of starting a new one I was wondering if anyone could shed some light on a problem I have been having along with my friends truck also. When the clutch warms up (after driving 30+ min) and you depress, go to shift into reverse it doesn't seem...

thanks Dave, I figured some of that junk was in the holes also. I was kinda confused when I saw it as it would make more sense to just put them in a plastic cap. Cummins I am sorry to hear that but it is kinda funny, thats how my friends truck was but not as bad when he had one broken ring. I...

hey guys how did you remove the waxy material on the bosch nozzles? I was thinking a propane torch or some rubbing alcohol.

sounds good, I see why they say no fuel :thumbsup:

but they are for water? and the one says not for use with fuel or flammable liquids so it might eat away at the seals and what not. What do you think?

cool thanks!

I cant decide if I should use the water bowl with a screen which will be a 10-30 micron or do the bowl with the water guard 10 micron as I already have a 6 micron and they are all large filters I think the 6 micron was referred to as a water separator. I just need some sort of fine screen to put...

Did you not know where the ATF was coming from? I'll mostly be running oil from my truck and my friends vehicles (the ones with bran new cars) lol. anyways I was thinking about getting a 10-30 micron filter with the water bowl or I could do a 10 micron with a water bowl but it has a "water...