Search results

cool thanks

The FD xdf is changed, here it is.....not perfect but close. I'll add more when I disassemble the file completely.

Your right, I can upload the fix but then there will be 3 files showing might be confusing for people. Any how here it is... changed the math it looks right for the most part and changed the kPa scaling, I was a little high sorry.

ok I probably have the wrong equation written in I'll check.

It should be a 27c512 chip. Chip orientation is kinda important, make sure the little notch in chip is facing handle when closed and the extra 2 rows of pins is between the chip and handle. Thats how it is in the burners anyhow.

just opened slims file and it looks corrupted, file size is right, but with a bunch of...oh my brain hurts kind of stuff. If you look at the file in the hex editor, you'll see what I mean, the first 2000 line or so are storage and when the chip is read, there should be a bunch of dots, unless...

Here is the file with added boost integrator and a few fixed scalars that was misses. Don't know to keep this file seperate from the other one that was posted though.

I thought I put that volts to boost table in there, probably didn't though I can add it. There was a lot of tranny tables that I didn't add for that reason, but when I sit down to build another file I'll put it all in there to show what is all in there.

I think I'm gonna wind up having to build a new EC.XDF. I really don't like the way the original author put it together. To me it's confusing cause it's out of order from the disassembly I did. I can understand why it was done, the important files to be changed first, but still. I personnaly...

As promised the changed XDF file. Will work for both bins posted. I think I got it all correct but let me know of errors and I'll fix.

upload flash and burn from moates. read chip ( make sure you have the right chip selected ) save file to buffer, put a name to it and save on computer. Make sure chip orientation is right as well

The ones that are posted will work need to be modified a little. that and some stuff was left out for obvious reasons.

PM sent. your welcome

moates has a switchable tune adapter for our trucks, the GX adapter for 28 pin chips but its easy enough to build an adapter for 6 to 8 tunes with the bigger 32 pin chip.

There is a XDF built for the manual tranny's. Here it is... never checked it though. Post the bin file and can check it to the XDF for corrrectness.

For bin BPDP and BPAA EC.XDF is the correct one for the DTC's but I noticed right away the first table ( boost ) is in the wrong address. I can redue the XDF with the correct address and post by the end of the week. Maybe add some stuff as well that was left out .

Most of the Bin files have different addresses for tables and scalars. That's why things look funny. If the bin is posted I could tell you the differences so they can be changed. Maybe post a disassemby of if for you guys , but that will take some time . And moates.net sells the chip holder for...

Most of the Bin files have different addresses for tables and scalars. That's why things look funny. If the bin is posted I could tell you the differences so they can be changed. Maybe post a disassemby of if for you guys , but that will take some time .

No I'm not Eagle-mark. I subscribe over there, cool site. Good people and good info on tuning. Not to many diesel guys over there ( well they don't speak up if they are ) I went about it the same way as you, but found the gas disassemblies only resemblences were the naming of tables and etc...

True .Depending on how they mounted could be a pain in the arse. Aren't they run by a single chain/belt on the tractor? Don't remember haven't seen the video in a few years.