Search results

A better description of the alignment problem would help. Does it wobble or move in and out from the pump. Wobble can be fixed by bending the pulley. In and out would be a pump getting ready to take a dump. Ted

All done, got back a little after midnight Monday I'm in Streetsboro Ohio a few miles from turnpike exit 187

I'm hauling a load to Charleston, gotta be there 7 am Monday. Driving back to Cleveland empty. 16' flatbed. Ted

Only downside is they need a bit more on time to get hot enough. Most have done the override mod. Ted

That is a very-very-very bad idea.. Ted

Starter wires are pretty easy through the fender with the tire off and the rubber flap removed. I seem to recall the bracket bolt to the block being a 13mm bolt head. Injectors can be done only removing the turbo heat shield. The heat shield seems like a Chinese puzzle till you figure it out.

I got my original AutoZone starter Oct 1 05, it lasted till July 11 09. It was still starting the engine but was getting slow when AutoZone replaced it. Almost 4 years, I figure, was pretty good. I used my truck to haul expedited freight and used the starter quite a lot. Lots of stops and starts...

Did you leave the plug in there? That's probably what I would have done. Won't hurt anything. Ted

$239.95 at www.partszoneonline.com for the 88894035.. List price is $354.99 Ted

The whole front cover has to come off. There are bolts on the back side holding the pump. Ted

Make sure the power source is fused. Ted

Will a tensioner from a 94 fit? I have a good one. Ted Edit- Heath shows it fitting 92 - 95..

Hay Deere, I have the computer program to set your timing. Ted

Just thought I would jump in here. Got the Sportster back in 91 and eventually went dragracing. Best was 10.81 @ 120. Built a stronger motor since then. Probably around 115 hp now. Real fun street bike. Ted

Going from Cleveland, Ohio area through Cincinnati into Kentucky and back to Cleveland. Monday 10/12, 7 AM leaving Cleveland. Ted

I have a single T-stat one. Ted