Search results

Thanks again buddy for all the advice

Sorry for not getting back sooner I was out of town for about a week. The resistor i have is a number 9 i got with the new pmd would a #5 resistor work better? If so would anyone trade a number 5 for my number 9? And if my fuel solenoid is the culprit can i change the solenoid or do i have...

Problem: my truck threw a code 36 but runs normally it has done this before bout i just add tc3w oil to tank and it goes awy but it keeps coming back should i suspect a bad OS and if It is bad how do you go about changing it? Demographics: tell us about your truck and your ambient...

Thx JiFaire Ill try the optical sensorharness next ijust got finished with the grounds and battery terminal connections so far no reoccurence of the codes

What i have done this evening so far is unhook the batteries (and clean all the connections) for 60 secs to force the pcm to "relearn" as well as clear the codes IU drove around for about 1/2 hour at various speeds and i got no codes so far :biggthumpup:

docray i bought the truck 3 months ago so i dont known how old the lift pump is or the os filter harness but i believe the ip is original but not sure

Problem: my truck stumble and kind of backfired and it threw codes 18, 35, 54 but after the momentary stumble it ran normally ____________________________ Demographics: tell us about your truck and your ambient conditions: - Year: -1994 - Truck model and class (ie: c2500) -k1500 -...

I was driving to pick my son up from school today and my truck stumble and kind of backfired and it threw codes 18, 35, 54 but after the momentary stumble it ran normally but codes didn't clear any thoughts i thought of maybe doing a relearn of the pcm by unhooking battery for 60 secs but i...

Sorry was reading as post about pmd failure prior to this and last thing i read was powersteering so i guess i had it on my mind when i answered and no i havent been using cruise control when i got the code 36 so i couldnt tell you and last time i got a code 36 my fuel gauge said 1/4 tank but i...

I paid about 17 dollars for my brace part #23502557

For you info: Starter bolts- GM part # 15544950 Starter bracket (gm calls it just "brace")- Gm part # 23502557

Update guys I went by the stealership yesterday to get new bolts and the bracket but they only had one bolt in stock and i had to order the other parts I went by the local hardware store and picked up a temp bolt (8.8 grade M10 1.5 pitch 110mm length) to get it back homeBy the way, Easyouts ARE...

gmctd- great explanation of IP operaton ghitch75- no my powersteering still worked when the code 36 happened I am pretty surte what happened was put a STRONG cleaner in with my fuel and it cleaned crud from my tank and that was causing the codes, I have since put Seafoam in the fuel...

Today I was at Home Depot and when I went to start up my truck I heard the worst sound I have ever heard followed by the sound of bolts hitting the ground. :( I jumped outta my truck and looked for the bolts and found my stater hanging loose and F'ing bolts boke off right at the thread in the...

Sorry I havent update recentlly as I have been working my tail off the last week- I put some seafoam in the fuel manager and put filter back in and havent had any codes pop up yet (Yay):thumbsup: BUT TODAY! I was at home depot and went to get into my truck and start it and the worst noise i...

Ok guys here is an update- I put powersevice diesel kleen and 2 cycle oil in on monday it stalled on me twice on monday so for sh*ts and giggles I took my FSD and retorqued the mounting bolts- no stalls since then (fingers crossed). Today (weds) I got a code 36 but no noticible change in...

Dan that port looks good i was thinking of putting in one of those when i saw a f350 super duty next to me at the light, where did you get that one from?

Yeah but your theory makes alot of sense

That'll teach me to listen to the parts guy:Flush:

The lubro moly i got was from my local napa auto parts and was recommended by one of the guys behind the counter. I didnt think about it cleaning the crud from my tank and pushing it into the IP and engine. i will try the seafoam in the filter bowl and see if that helps as well as possibly a...