Search results

I had similiar symptoms when my OPS failed.

One more question. What do you gain by doing the spring bend mod?

Thanks for the reply! When I checked the compatibility chart for that clutch it said NOT compatible? But it looks like the 4 bolt I now have.

I´m looking to do this also. Do you have the stock 95 water pump? Is the new fan clutch for a 95? I want to do the same but I was under the impression that you had to change your water pump out to a late 90s model. Thanks g

OK now I understand.

Steve why are you making so much smoke? Are your boost # normal. We were up at our place in San Miguel de Allende (6400 ft) over Easter and mine wasn´t smoking at all.

Mine cycles as you described when low. When I add refrigerant it stops. I need to find my very slow leak!

Turbo Power sounds like a kick ass powerfull diesel engine. Mine went to the plastic recycle bin after the first drive.

The dust has finally settled and I have some time to write this. I went up to Cali from my home in Mexico for the holidays. It was 6 days of driving, three up and three back down. Just over 3500 miles. I left with a stock exhaust, flat airbox and 4 bad shocks. Oh yea and I had never had my...

Once again THANK YOU Big T. She ran perfect at 70mph all the way to San Diego. No Codes! It was a pleasure meeting you and yours. Friday the 4 inch exhaust:thumbsup:. gus

PMDCABLE all the way. You can´t beat the price and with free shipping its a no brainer. Nice to support the vendors on this site.

Welcome to the board. There are alot of very knowledgable peeps here. I´m not one of them. I thought it was pretty straight forward. I would replace the chain with a complete timing chain kit and do the harmonic balancers at the same time. Oh and the water pump too. g

Thanks Big T. I sent you a PM.

That can time my injection pump? PM me please. g

It seems thats been my problem the last few weeks. Drove it around for hours today without a hickup,stall,no start or hard start. I guess I have 2 functioning PMDs and one waiting in the states. Thanks again everyone and Merry Xmas! gus

Thanks Mudbath!

I checked out Kennedy online and couldn´t find the ready made one in the 6.2/6.5 section. Do I need to call their CS?

No I put in drive with the motor not running and turned the key to starting position wich starts the LP pumping.

I am still having random stalling problems and was sure it was the 2 PMDs I have. Well today I started checking fuel flow to see if maybe that was it. So I replaced the fuel filter and then checked my flow from the water drain valve I had none. I opened it all the way and the truck died. I...

OK another thing to check. I did the tank sock procedure about 13 mos. ago. Really don´t want to drop the tank again:nonod:. Thanks Bison g