Search results

Well I tried the spray paint again and it didn´t work worth a damn. I went 2 tenths of a mile and all the paint was gone on all 4 corners. Our asphalt highways are pretty rough. There is a cemented road with a bunch of speed bumps. Would that work? Its a half mile long but I would not get to...

Hows the passenger side rear barn door?

Does the kid have any cool goodies left from the wreck?

Yikes thats alot of money! Couldn´t you get one at a wrecker?

Thanks for that. Yes these roads have taken their toll on my dash. It looks like its gonna come off on some of the bad washboards,potholes,ect.

Thanks DD. I¨ll go try it again on a much shorter drive:thumbsup:

I can´t remember the name of the vendor that sold the dash board anle iron reinforcment chingaderas. It was flying something or another. Searched but came up dry. Thanks gus

Well I did the inflation test with some off white spray paint. It seemed to wear off evenly front and back at 55 lbs. That seems strange to me with so much more weight up front. So did I just get extremly lucky or maybe I drove to far? I drove maybe 4 miles. Thanks gus

I pumped them up to 55 all the way around and it made a huge difference in handling. Before as fermanator described it was squishy and kind floated around. Now I will experiment with the pressure. How does the chaulk line on tire work? Thanks again

Thanks guys. They are all E load range LT tires with 80 max. I´m gonna go pump them up a bit.

Oops! Maybe not the right place. Sorry mods.

I just had new General Grabber 265/75/16 AT2 e (load range) tires put on my 95 sub. The drive home was alot different than the drive there with my old Michelins. I checked the tire pressure and they were at 40 lbs all 4. Way too low for an 80 lb max tire I would think? What pressure would...

Did you replace the OPS with an acdelco? Your symptoms sound like my OPS problem but your codes are the same as when my IP died.

I leveled my Sub with the torsion bars about an inch and a half. It negativly affected the ride so I returned to original. The roads I drive are really rough and it was way to stiff (kidney belt needed)with the bars turned. I would go with a body lift.

It was very easy to take out :). Now trying to locate a new one down here might be not so easy. Thanks again g

Thanks for the photo. Looks like I´ll be looking at the resistor pack as the wires behind the glove box were fine.

Thanks WW for the quick reply. It sure does look like a major PIA. I´ll keep my fingers crossed and go check behind the glove box.

My rear A/C blower only works on the highest setting. I checked all the fuses and they are fine. Any ideas on what or were to check? Thanks g

Rock Auto has the bosch duraterms for 7.74 and ac delco 60g for 8.16. Thats without the discount code.

I figured it was my memory. That was the price for the kit.