Search results

I installed. A new lift pump, was thinking not enough fuel to IP, had 5psi with old lift pump, now has about 9psi. Didn't help. Did the clear hose no air, try that too. I'll have to get. A boost gauge and see what that shows, guess it could be a bad turbo? No black smoke. Dosen't seem to...

No smoke, clear, it just seems that it should be able to climb a hill at better than 45mph empty. It won't shift down manually, cable is messed up, I tried. I pulled cable off trans and trans moves through all gears freely. I Have to get to that too. It just seems to me that it should kick...

Whats Td in? Turbo in take? I know waste gate actuator, where does the boost gauge vac tie in, Intake after turbo? Thanks. Mike

I tested for vacuum at the waste gate it's about 25in vac. The waste gate is very hard with vac and easy with out vac, actuator seems to be fine, some play in in turbo fan side to side , but not hitting anything. Ill have to install a boost gauge and see what is happening there. I'll have...

It is a daully

Is there a special scanner for transmission codes

It's putting out air, air filter is clean too

waste gate seems to work ok, i put a vac gauge on the vac line at turbo , not sure how to test the turbo itself?

Could cat be clogged? Exhaust comes out, seem ok

I bought it to use as a plow, run around, go to the dump, fill potholes truck. It didn't run when I bought it, bad lifter, which I replaced. After I replaced the lifter it started right up but Smoked like a steam engine. Turns out that the previous owner reversed 5 and 7 injector line, don't...

No big box on mason dump

Sorry -0.75 timing

Sorry -0.75 timing

HI: Guys, I have a 2000 GMC 3500 automatic 4x4 mason dump with 60k miles, new lift pump, new injectors, new glow plugs, relocated PMD, new fuel filter, new rubber fuel lines to injector pump, injection pump timing is -75. no smoke. it seems to run good but has no power. Going up a hill it's hard...