Search results

If it bolts onto a 4.3, it will bolt onto a small block as well. The 4.3 is a 350/5.7 missing two middle cylinders. All the external bolt holes are the same.

http://store.summitracing.com/egnsearch.asp?Ntt=mopar+engine+fasteners&N=700+400295+115+4294922123&NeXID=5&Ntk=KeywordSearch http://www.bodyboltkit.com/servlet/StoreFront Try these places.

Thanks Gunner and thanks for the all the help with the heavy lifting, wrench spinnning and the prep work on the undercoating. Nows lets see what we can do about your lift pump on your truck. BTW I will post some pics of the before and after of the underside of the Blazer as soon as I get a...

Probably yes to both!!!):h

BTW the return line to the trans is the upper line on the transmission, in case anyone was interested.

Ok Trans is in as well as the transfer case. Will be installing new U-joints on the rear shaft tomorrow and finishing up with the cooler install. I took advantage of the fact that I could get to the entire underside of the body and cleaned it up before I undecoated it with a duplicolor DIY...

First start with a list of what you want out of the engine. Do you want it to last like it did the first time or are you after high proformance? One cancels out the other. Most people would want something in between. Once you figure that out it gets easier. Either way you will probably want to...

Anybody know which of the two ports for the transmission cooler is thepressure and which one is the return on the 4l80e? Need to know so I can install the extra cooler the way I want.

Ok problem with this: Later model wheels if you notice have flange type lugnuts and are hub piloted, meaning the center of the wheel mates up to and centers the wheel to it and the lug nuts simply clamp it to the hub face. The older style used acorn lugnuts that both centered the wheels and...

No adjustment, only replacment. Prety easy job though. Remove inner door panel, open access panel inside door, disconnect linkages, drill out rivet holding old door handle in and remove. asembly is reverse and youcan use a self tapping screw instead of a rivet to hold the old one in place.

My 94 Blazer has a power steering cooler on the left side of the rad. It's simply a tube that runs up and back down with some fins on it.

I only need the shifter with the switch as I was thinking about using it to control my TCC so the switch would be a little closer and would free up a switch spot in my overhead console for use with a manual override glow control. And as soon as I finish the switch panel so that the lights work...

On a kinda related note I was wondering if the later model of the 88/00 body style trucks had a tow/haul button on the auto shifter? Also wonder what the later models have and if they look like they mount the same. I have an idea for a use for one in my truck. I might get a chance to look at a...

I'll be ading a remote spin on filter for the transmision this weekend but plan on adding a dual mount oil filter head at a later date. I already have the adapter for the block side so all I need to get is the dual filter head and find a good spot to mount it. I don't plan on increasing my...

Yeah, still no one curious about OK.):h

Update; tranmisson arived at the shop yesterday.):h I will be installing it along with a few upgrades this weekend. I have three days to work with so I should have enough time to get it done. I plan on installing the B&M cooler along with the oil cooler under the truck behind the trans with a 10...

No prob as this site has been a great find for me and I just wanted to contribute a little. BTW my transmisson came in yesterday and I will be installing it this weekend and yes I will be taking pictures and doing a write up on it and the planned mods. Trust me there is always a mod/improvement...

The actual name for those is "woodruf keys". Just helped Guner0812 withthe pulley on his and the box said it had them in it but they wern't there and at least on his truck they wern't required to install just the pulley. The pulley bolts on with four 15mm headed bolts.

Haven't had any trouble out of my Walbro yet and it got pretty cold here this winter but not Alaska cold. You could call up Walbro and get the specs. I lost the web address when I reformated my drive to clean it up but I think if you search you could find it pretty easy. I don't know anything...

It is.