Search results

I'd have to say you have POSITIVE CAMBER and/or too much TOE IN Get another shop to check it.............FIX IT I mean Maybe this will help http://www.stockcarracing.com/tipstricks/camber_caster_toe_setup/index.html

I know it Blake, and I now you more than likely already knew what I said.......... just wanted to raz ya a bit.

Sorry about that, I failed to add that you'll need 4 short pcs of heavy angle, like 3x4x5/16 to weld to the 3" channel. You'll lay the long side along the back of the c-channel with the angle in to lay your g/n ball plate on, adjust it down as much as you feel needed for your ball. Normally a...

:eek: never in your life:eek:

Evan, any problems with the extend-a-hoe feature?

You'll get no argument here on how capable Cats are....... ran plenty of em, but for versatility, speed and weight to power ratio...... not to mention price and repair part prices.............you can't beat Case By the way........... what company first introduced the...

Looks almost like mine......... that an M model? Mine's a Super K, goes about same on weight. Looks like a 20' deck? I have a 25' w/5' d/t and 35 w/ 5' d/t.......never have problems maintaining speed with either one:thumbsup:

After having met Craig face to face and seen his truck up close, I too wished I could go with the lift and tires like his, really love that stance and look, but with the type use my truck gets towing goosenecks and heavily loaded bumper pulls, it just isn't feasible. But man that is one serious...

I run 65 in my fronts and 60 in my back tires.......... load range E

Howdy, from one fellow Texan to another

Exactly, if you're unsure of how to keep them square or get them square, let me know...........using a square or speed square don't work for this too good, should all be done with a tape measure from corner to corner........ check and re-check.......then check again :D Be sure you are on a...

As far as the cab protector plate, I'd use either 3/16 or 1/8". The area covered will not be much so the thinner material would be fine, plus you will be building a headache rack around it that will give it structure and rigidness. By the way, my personal headache rack is built from 2x2 and...

welcome to a great place to hang out

Welcome to the site.............stick around it could be a lot of fun

To my driveway entrance............ Cobb and I have wonderful times planned for them:incazzato::Justwait2::rocketwhore::usa:

I'll have you some information soon............ been kinda busy bro

So you don't want a full headache rack, just under the window? The 3/4 x 3/4 angle you'll only need one stick for decking support. I'll need some time for more plans though........things have gotten me swamped at work now

bucha whimps :D we used to stack out flat bed 18 wheeler trailers daily when folks still used square bales around here

you planning on getting your decking material and all at the same time? gonna have skirts? let me know and i'll figure you some stuff up

I haven't even seen a square bale in years. who uses squares anymore:eek: Lol j/k but I haven't hauled any square ones.