• Welcome to The Truck Stop! We see you haven't REGISTERED yet.

    Your truck knowledge is missing!
    • Registration is FREE , all we need is your birthday and email. (We don't share ANY data with ANYONE)
    • We have tons of knowledge here for your diesel truck!
    • Post your own topics and reply to existing threads to help others out!
    • NO ADS! The site is fully functional and ad free!
    CLICK HERE TO REGISTER!

    Problems registering? Click here to contact us!

    Already registered, but need a PASSWORD RESET? CLICK HERE TO RESET YOUR PASSWORD!

Search results

  1. tinknocker

    6.5 Turbo Gasket

    I have had several of these trucks and I have worked on them and put back the turbo metal to metal with no problems. My K3500 has a leak that blows carbon and the turbo is not spinning up. I have looked everywhere for a gasket. This is the Turbo Mount Gasket. Any Ideas??
  2. tinknocker

    C6500 anybody have one?

    Is there anyone here with a C6500? I have a problem that I think is related to the ignition switch. The thing won't start unless I jump the solenoid. Then it has a safety of theft deterrent mechanism that beeps and shuts down the truck after a few seconds. I found a workaround. I set up a stater...
  3. tinknocker

    4L80E - Please give me your expert opinion

    1998 K3500 - 4L80E Fluid was light brown. Shifting was ok but lost OD sometimes and a cpl times had limp mode. Reverse had a shudder and slip but works. Changes fluid to the good stuff and filter, etc. Cleaned the sump - fine dust like graphite sludge, like a thin coating over the inside of...
  4. tinknocker

    PO370 (timing reference)

    I recently changed my 98 truck to mech. IP.....Runs great! Just ran the codes out of curiosity and the one #PO370 - Timing Reference High has me wondering. I was wondering what sensors are in play with this code. The only codes other than the various elec. IP codes (4 of them) were: Timing...
Back
Top