Search results

Thanks guys.. Bigblock 88 your fork was bent and still worked! wow I bet mine is bent or worn paper thin. I check e bay for a gasket set or make my own from paper unless any supporting vendors speak up that have a set in stock.

So has anyone ever torn down a saginaw 4 speed? any special tools needed for the procedure?

My nephew in OR says that all the time. :D I think I'm keeping it so i can can have a 2009 parked right next to it.:driving:

68 Camaro Saginaw 4 speed - matching numbers stock trans. Symptom - When backing up slowly at about 15 feet back the car just stops- feels like it's binding up in reverse. Then when letting the clutch out again it pops and starts to goes back again, then binds up again.It seamed OK driving it...

I can tell you even with the blade off and stock tires and no ballast my truck stinks in the snow with heavy engine up front. I couldn't made it up a 8 inch covered windy rode that had hard pack under it. And when a Toyota Rav 4 and a awd e320 with snows scooted right up, I felt like weenie. I...

We have a system in Tampa we sold and support, I'll be sure to look you up if I come down.

Just a FYI if you plow like I do. I put a switch in-line between the hi and low beam wire with diode. That way you can turn this off when running the single sealed beam that is found on 99% of plow light setups. I figure the are not meant to burn or light up together at the same time. I was...

I have a friend they used it to fix his bike. The jets in his carb were messed up up from not using stable in the winter months.

I know they are ridiculous. from a dig I got my friend. On the top end would be a different story.. But I didn't tell him that lol!

I run Timbrins and now she only squats about 1" at the mirror with the plow. before them it really took a dive down with the x-blade over a regular HD blade.

My bud a work has the CTS with a manual trany and custom exhaust, It goes good but I crushed him and now he wants a V.

I use the sand tubes wrapped in duck tape, yes they rip taking them in and out.:yikes:

Beware of the offset on the after market rims, to far out you'll be doing some cutting, to far in and you'll rub the frame.

The Dragon My Brother live in Oak Ridge and teaches as well as rides every chance he gets. He's trying to get me and my buddies to ride down.. 1000 miles from NH to do the Dragon.. Have you done it? I have the video and looks like a nice ride.. The 11 mile stretch of road with 318 turns...

Nick how many flashlights do you own... :confused5: Did you sleep with light on as kid? I didn't like the dark, so that's why I must own 20+ flashlights. More lights the better!!!

Bud I pulled out the black stoppers and snipped the plastic down flush that they plugged into with dikes and box cutter. Then I put the black stoppers back in. Fits perfect and will not take off rubbing the H2 wheel finish!

Winterizing Steps for SEARAY 260 DA 5.7 EFI Fuel Conditioning Starting with about ¾ fuel add the recommended amount of 2+4 fuel conditioner. I figured 50 gallons of fuel was in my tank so we added one big and one small bottle 24 oz total. Note: This is very messy stuff looks like...

This is the notes I took with a experienced tech at my Searay dealer. Lots of the same exact things are done for other boats and models. Be sure to check with your manufacturer first to see if these steps are right for your application. I or Dieseltowingresource take no responsibility for a...

Just thought I would start this, because I see more people not using any. It helps 3 things I know about.. 1) It keeps the front axial weight down, by transferring weight from the front to back. 2) Make the truck more stable on the road. 3) Improves rear wheel traction. Note. It...

Faye Glad you and everyone around you are alright! Is that a horse trailer? If it is, good thing it appears empty! Did anyone find at the scene the chains defective or not latched correctly/ crossed? :confused:Makes me wonder what good are the chains if they don't at least hold up to...