Search results

My hammer doesn't move that fast

I'm guessing they lied to you. I seriously doubt autozone would sell tested and balanced injectors You need to take them to a good rebuilder or contact rockabilly here

Are they Bosch? If they're just box store crap. Return them and get yours rebuilt and balanced. Or order Bosch injectors and get them.tested and balanced

Even new injectors need to be tested and balanced before installing. Where did you get your injectors?

I've had to ask myself why I didn't or why I did do things, many times over the years. Most of which, alcohol wasn't even involved

I thought it was, Can't stop now that the clothes are off. And I wonder why I got married at 17

I would have gone with the schedule 80, 8, 10 or 12" - or corrugated in similar sizes. Slotted covered corrugated if that would have been appropriate. Sometimes you can't go too big.

I'm on the wagon. I've got 3 family sized bottles of J&B here taunting me.

F lowers seem a little harder to find. I'm not sure what needs to be changed to convert one

I'm sure you aready know, Don't run out of the downspouts to the pipe without a gutter box. / cleanable trap

Sounds like the pipe is the issue Is it schedule 40 PVC pipe? Is the 4" schedule 40, the black stuff in the picture? If it's the black stuff, get the appropriate rubber coupling. You may stub a short piece of 4" pvc out of the Y to use a rubber coupling. I have used rubber bushings before...

The only options I see are the 4" pvc, schedule 40 or 80, should measure about 4-1/2" OD What does the lettering on the 4" schedule 40 pvc say?

Something isn't right. Are the Ys the same size on.both ends? I've glued a fair amount of pvc and never encountered that issue. Is the Y schedule 40? Can you see lettering on the Y? I have a bunch of Y's and T Y's in the basement they're all schedule 40. What is the diameter of a 4 inch...

I've never run into that before. It seems the Y must be an adapter to go from schedule 40 to something else. Or it's just made wrong.

I torque everything. I used to break 3/8 bolts without even noticing they got tight. Then I got so weak that I couldn't tell anything. I've been hosed by other people I had do work for me, that didn't use a torque wrench Both, over and under torqued.

So the Y with the 4" pvc pipe in.it is a different ID on each end? If so, it must be some type of adapter Y. Often to go from different types of pipe to PVC, they make rubber couplings with hose clamps. I'm not really sure what you're asking...

I never remember seeing anything about right or left side. I have no idea what number I used to torque the glow plugs to.

If you get near me and have an issue. We also have triple A. If you would need it towed farther. I don't know if AAA will let you do back to back town. If you had to have it towed farther than your tow limit. You could have it towed to a truck stop or something and then use one of our tows...

@Glagulator Can tell you the connectors needed. I just ordered a bag of the connectors. They aren't too pricey

With the IP on the truck, having that many.miles on.it, I would swap for your spare and run it.