Search results

Sounds like I could use one. Are they hard to swap?

That’s what I’m trying to figure out. Although tests show no play in the UCA bushings, I’m wondering if new energy suspension polyurethane bushings would help here? Did I mention this is the tightes the front end has ever been?

I’ve replaced that plug before. Also the resistor.

I just ordered a GM Genuine blower resistor off Amazon. Pretty sure it’s the resistor based on the middle speeds going off and on prior to the sudden no work at all this am.

Blower motor no longer blows at all. It was cutting in and out at the speeds less than Hi. Now I get nothing.

As the title says the variable speed settings for the wipers is only producing low and high with no differentiation in speed between the two. Also, sometimes the wiper just fails to shut off for a long time. What part should I be looking to replace?

AC stopped working. Checked fuses on side of dash and they are good. The dash HVAC switch panel is new and has been working. The variable speed control was not ahowing much change between Low and Hi, but Hi was working full on. Could this be the resistor going out?

After a weekend of off-roading and camping, I took the Suburban in for a revisit on alignment because it was steering to the left. The alignment tech confirmed some issues that I was seeing: 1) Outer tied rod on passenger side was loose (again) in the knuckle. Obviously I over did it with the...

Gott make hay while the sun shines….errr pour concrete while the temps are above freezing.

Or my ABS which works infrequently (less than 10% of the time), or my transfer case which now has 3 of 4 settings working, only missing 4 Low, or my formerly variable speed wipers which now only has two speeds and decides to shut off only when it feels like it, not when I shut it off.

Well you can always make fun of my early locking left rear wheel, or my dash that’s shaking apart from front end wheel vibration at 70+ mph, or the rattles inside my driver’s door, or my Pioneer head unit which only partially works in many respects.

I believe the remaining pulse may be from the slight feathered wear in the tires from prior to road force balancing. I will try rotating the tires.

Took the ‘99 Suburban in to have the wheels road force balanced and the alignment done. They had to dismount the tires and vacuum out the balance beads in order to do the road force balance properly. Results were a significant improvement, though there is still a tiny pulse at speeds of 70 to 75...

The two stroke dye won’t cause any issues. I’ve run it many times. Red dye diesel also will not cause issues.

Are you saying the brand new Stanadyne IP which costs $2700 failed on you? That AC Delco reman I got for $794 is running strong.

Geez you’ve been through hell on this. I’ve been there on the ‘94 and you helped diagnose it with the loaner IP. Hope you finally get this resolved so you can enjoy the truck.

https://www.google.com/search?q=GM+6.5+diesel+DTC+2051&ie=UTF-8&oe=UTF-8&hl=en-us&client=safari A P0251 code on a 6.5L diesel engine typically indicates a problem with the fuel injection pump's optical sensor or camshaft position sensor circuit. This sensor, which reads the rotation of the...

You could use Marty’s carb synchronizer tool.

That Ghia is like going back in time for me. I started my DIY mechanic career on air cooled VW engines. Are those dual Weber carburetors? Where’s the turbo?

If those were forged lower control arms, the shock mount would be bolted on. I’m confident your front end is a bigger shit show than my ‘99.