Search results

All of my wax is gone, road salt.

Whatcwould you use on the pumpkin?? Not anything that will retain heat, I know that much.

This the stuff?? May be cheaper then POR 15. https://buyat.ppg.com/refinishproductcatalog/ViewProduct.aspx?ProductID=c98c3f28-89c5-467d-9983-e87c240f4c09 Minimal prep needed?? Spray can, or just the quarts?? (I can brush it, correct?? (Unless I buy a small gun...) On my case, brush would be...

Come summer, I want to start cleaning up the frame on my truck, axles, etc, and coat it with something, POR 15 is what I was thinking. Does it have to be down to bare metal for this to work?? What have you guys used?? Open to suggestions?? This is my daily driver, so it will have to be done...

For future reference..... http://solutions.3m.com/wps/portal/3M/en_US/Marine/Home/Products/Catalog/?PC_7_RJH9U5230GE3E02LECIE20S4K7_nid=BZVN4V5PK4beRJ5GMFSMV0gl

Thanks!! I will wait until summer, as the truck will not fit in the garage. Any kind of eraser wheel??

$5 says it is the wiring harness in your door, from where it leaves the cab, and goes into the door. Mine is going, (keep loosing the door speaker once in a while,) and same seat symptoms as you. You could fry an egg on my seat, then went all of a sudden. Gonna price out that section of...

This is my only vehicle, so I will have to take one off, get a sample of tape, then put it back on.

Thanks Pepp. That is exactly what I am looking to do. Now, will the body shop supply know how wide of 3M tape to use?? And it is 2 way??

Curiosity has gotten the best of me. Come spring, I want to remove the flares on my truck, just to see if all is well under them. They are the factory flares. What will be needed for re-install?? Are they taped on too?? They have those plastic body plugs, or whatever they are called. Will do...

Welcome aboard!! Nice looking Jimmy.

AGCO (Allis Gleaner Corporation.) is the parent company. Great too see the investment over here. :)

Sweet!! Can't wait to do a tour. http://www.bloomberg.com/news/2011-01-20/agco-plans-to-build-tractor-factory-in-minnesota-ceo-says.html?cmpid=msnmoney

And that is the reason why Navistar told Cummins where to shove it. Cummins swore they were going to stick with cooled EGR, so IH designed their trucks around that, no extra room for a DEF tank/plumbing. Then Cummins dropped a bomb on them, said they did not have to go with SCR, but it gave...

That is amazing!! Gotta love SISU power. From what I hear, all of the issues have been taken care of on the newer models. Did you have that dyno'd??

Ford Uses DEF, and eventually Cummins will go SCR. They are planning a major power boost for the Cummins, and the only way for that to meet emissions, will be through SCR.

What problems have you had with it?? Sweet tractor.

Thanks!! That is great. I do the same with my 04. Oh, do not forget to use the key to unlock the door once in a while, and lube the lock in the winter too. My drivers side lock is seized. Lesson learned. :)

On the MF 8600 Series tractors, they have two heaters, one is wired in with the block heater cord, so when you plug it in, it defrosts the tank. The second is an actual heating loop off the cooling system, so hot antifreeze defrosts the tank as the truck warms up. Are these just electric heated??

Have the new HD's gone over the that Switch blade style key?? if so, could you leave the truck running, and use the second key to lock the truck up?? I see the cars have gone over to it...