• Welcome to The Truck Stop! We see you haven't REGISTERED yet.

    Your truck knowledge is missing!
    • Registration is FREE , all we need is your birthday and email. (We don't share ANY data with ANYONE)
    • We have tons of knowledge here for your diesel truck!
    • Post your own topics and reply to existing threads to help others out!
    • NO ADS! The site is fully functional and ad free!
    CLICK HERE TO REGISTER!

    Problems registering? Click here to contact us!

    Already registered, but need a PASSWORD RESET? CLICK HERE TO RESET YOUR PASSWORD!

Search results

  1. R

    Rebuild about done

    Thanks for all the info. The Investigation continues
  2. R

    Rebuild about done

    Stock lifters and rods
  3. R

    Rebuild about done

    We didn't check the compression on the passenger side yet. We wanted to figure out the easy side first.
  4. R

    Rebuild about done

    The timing dot was off on the time keeper. We used the old timing gear and chain to get it corrected, then replaced the chain w/ the time keeper.
  5. R

    Rebuild about done

  6. R

    Rebuild about done

    Here are the pictures
  7. R

    Rebuild about done

    My son took off the driver side head. The larger valve touched the cylinders 1, 3, 5, and 7. 1 is the worst getting less severe in succession. I ceramic coated the pistons and the #1 has a very slight indentation. It's hardly noticeable to the touch. It's probably a thousandth if that. the...
  8. R

    Rebuild about done

    The first time my son did the compression test it was 400 psi. He didn't count the cranks. he just cranked until it the gauge stopped climbing. After that, he read somewhere online to just crank it 8 times and record the number.
  9. R

    Rebuild about done

    I reused rods and pistons. The block was re-sleeved and machined as well as balanced at a local machine shop. I ported the heads and labeled all the vales and springs to make sure they went back in the same place. I also re-lapped the valves just to be safe. My son checked it with a camera...
  10. R

    Rebuild about done

    Yes it is stock. I did put the thicker Head gasket on it since the block was machined.
  11. R

    Rebuild about done

    What should the compression be? My son just did the Driver side. The pressure is with 8 cranks. 1=240 and 3,5, & 7 are all with in 10lbs of 300 PSI. I know # 1 is lower than it should be. Additionally, all the glow plug ends are 1/2 of what they were when they were installed brand new. I'm...
  12. R

    Crossover Pipe Bolts

    Thanks!
  13. R

    Crossover Pipe Bolts

    What size are the crossover pipe bolts. I have a few of them that have broken? I was looking at rockauto but they don't have a listing for them.
  14. R

    Rebuild about done

    I hope it's something minor.
  15. R

    Rebuild about done

    Thanks Will and Chris for the info.
  16. R

    Rebuild about done

    It is unburnt fuel.
  17. R

    Rebuild about done

    My son is a heavy equipment mechanic but doesn't have the right compression tool since his is for big excavators, however his boss thinks he has one with the attachment for the 6.5. Hopefully he can find it. Just logically thinking of possible causes. Tell me if I'm wrong or missing something...
  18. R

    Rebuild about done

    So the compression is checked done from the glow plug hole not the injector hole?
  19. R

    Rebuild about done

    same cylinder different swapped injectors 1/3
  20. R

    Rebuild about done

    Swapping the injectors didn't fix the problem. I have a camera I am going to do an inspection with just to see if a valve is stuck open before I do a compression test. Will all compression testers have the correct attachment for the 6.5 or can I get any one off amazon?
Back
Top