Search results

Which pins do you use

My ses light is normally off but yesterday it came on when i got up to 75mph so i let off the accelarator and it went back out any info would help. Thanks in advance

Kicking in and out of overdrive at any speed above 55mph does good at that speed and lower

Well i gotthe brakes fixed and the tranny decided to mess up

I got the abs module changed and i beleive i have all the air out of now but on a positive note my brakes are working and i have real good pedal might have a 1/4 inch free travel before they start grabbing

Not losing any fluid a local mechanic that works on a lot of the trucks said it sounded like the abs module to him so i found a good used one and i'm trying it now so hopefully it will fix it

Well i done some more bleeding on the brakes and got a little bit of pedal but when holding them they continue to seep down to the floor

I will see if i can find it

i filled it between bleeding each wheel to keep that from happening. If the abs module is bad could it cause this problem and if so is there a way to bypass it

Well i was wrong bleed the brakes again tonite and took for a drive and the pedal starting going all the way back to the floor

The brakes were wore out so they needed to be changed and i had to turn everything else in for a core but the booster was starting to leak so it worked out for me

I had to replace the master cylinder last bite because my pedal never got any better but after replacing and bench bleeding the master cylinder and bleeding each wheel one round my pedal is starting to get stiffer thanks everyone for the info

it looks like it is pushing the fluid back into the master cylinder when the pedal is pushed

Yes every thing was bleed the way every one on here has to do it in other post but still dont have any pedal if there is bubbles in the master cylinder what does that mean? Have air in the lines or an internal leak on the master?

Ok i will do that. It was a brand new one

Ok i will keep bleeding them and see if that helps

Yes i adjusted that but it still didnt help

What are you calling the star wheel?

Cant find a leak anywhere and i have replaced the booster,master cylinder, and power steering pump but pedal still goes to floor

I got the brakes changed but my brake pedal goes to the floor before the brakes grab and hold that is the reason i changed the brakes