Thanks to hemisareslow:
Since to my knowledge no one makes an H16 HID bulb yet.....I decided to make one myself....
I removed the fog light from the housing to make it easier to test fit...but it is not really needed...here is a pic of what the factory H16 bulb looks like in the housing...
Check out the DIY forums for cool mods....
We will be moving them to the appropriate subject forums soon....Or a stickey in the appropriate forum with FAQs and links to the appropriate DIY stuff...
Let me know how you would like that.
Step 9:
Once the nut is off, spray some WD40 into the center spline, then tap the axle into the hub gently until it stops. It will move about 1". This will make it easy to pull the hub off when it's time.
Step 10:
There are four 15mm bolts that hold the hub on. These are also...
Preface: If you are running oversized tires, high hp, or subjecting your truck to extreme shocks on the front, like drag racing or sled pulling, your front wheel bearings will not last much past the 36k mi warranty.
You can tell if the wheel bearing is shot by jacking the truck up til the...