• Welcome to The Truck Stop! We see you haven't REGISTERED yet.

    Your truck knowledge is missing!
    • Registration is FREE , all we need is your birthday and email. (We don't share ANY data with ANYONE)
    • We have tons of knowledge here for your diesel truck!
    • Post your own topics and reply to existing threads to help others out!
    • NO ADS! The site is fully functional and ad free!
    CLICK HERE TO REGISTER!

    Problems registering? Click here to contact us!

    Already registered, but need a PASSWORD RESET? CLICK HERE TO RESET YOUR PASSWORD!

Search results

  1. P

    A little maintenance before att install, couple questions

    It's nothing crazy and not consistent at all. It's funny that before the swap I didn't have any noise at all. Ive done the screwdriver on the injector and at times it sounds great and randomly it will chattered.
  2. P

    A little maintenance before att install, couple questions

    will l ive taken your advice and swapped in one of my old injectors and its still knocking, i cracked the nut to let it bleed as well. Where do i check next? the line kinked? seemed like plenty of fuel was coming out when the line was cracked. thanks for the help guys
  3. P

    A little maintenance before att install, couple questions

    I used your method and it sounds like the number 6 injector is knocking, I haven't yet to crack the line yet though. It's weird that these brand new Bosch injectors would be bad
  4. P

    A little maintenance before att install, couple questions

    Everything is all good now, just needed to clean up connectors a little more. So I started it and runs fine, only concern is that it somewhat sounds like an injector knock. It's definitely "clacking" more. Other then that it runs great. I don't even really know if it's an injector knock or not...
  5. P

    A little maintenance before att install, couple questions

    Only things that I disconnected were two sensors on intake manifold but I'll check them. Thanks guys
  6. P

    A little maintenance before att install, couple questions

    Well found out the issue wasn't the batteries, both batteries are good and fully charged and I'm gettin zero power for anything. I cleaned up the terminal connections and check some of the obvious grounds and all appear ok. Also checked all glow plug connections and forgot to put the one below...
  7. P

    A little maintenance before att install, couple questions

    well ive completed my swap of the a team turbo and finished the injectors and glow plugs. i get everything back together and the batteries are dead, really dead. Im so anxious to start it but i have to wait for full charge on both batteries. This sucks.
  8. P

    A little maintenance before att install, couple questions

    Well I got the driver side on right with the cap towards the firewall
  9. P

    A little maintenance before att install, couple questions

    Nice, it's a good feature this little clamps are a pain
  10. P

    A little maintenance before att install, couple questions

    Finally received my att and figured while I'm in there I'll do the injectors and glow plugs. So I've got the turbo off and I have a couple of questions. 1. When installing the last injector, is it ok to install the cap before throwing the injector in or do I have to do it once the injector is...
  11. P

    tail lights not working, somewhat stumped....

    Put the brake light switch in and it didn't change anything. I'm going to check it at night, it was prett sunny today but I'm pretty sure that they aren't working
  12. P

    tail lights not working, somewhat stumped....

    Front markers are not working
  13. P

    tail lights not working, somewhat stumped....

    It all started out with none of my lights working in the rear so I relocated the ground and the brake light and blinkers came back only. So i checked the fuses and replaced the blown 20 amp fuse and the reverse lights came back. The only ones that dont work are the tail lights for running at...
  14. P

    ATT has been ordered

    I already paid for the tune but I'll run turbo until I get the tune
  15. P

    ATT has been ordered

    Yes, he finally got back to me today and told me it will be a few weeks for the tune
  16. P

    ATT has been ordered

    Ok thanks
  17. P

    ATT has been ordered

    somewhat settles my mind. I tried calling him and an email with no response yet. Im getting anxious over here.
  18. P

    ATT has been ordered

    hmmmmmm I purchased one off the walkingjdesign website with a kojo tune. I hope i didnt get screwed here.
  19. P

    ATT has been ordered

    what was the turn around time for you guys? I ordered it tuesday and havent heard a thing from walkingj
  20. P

    ATT has been ordered

    Ahhhhhhh there it is
Back
Top