• Welcome to The Truck Stop! We see you haven't REGISTERED yet.

    Your truck knowledge is missing!
    • Registration is FREE , all we need is your birthday and email. (We don't share ANY data with ANYONE)
    • We have tons of knowledge here for your diesel truck!
    • Post your own topics and reply to existing threads to help others out!
    • NO ADS! The site is fully functional and ad free!
    CLICK HERE TO REGISTER!

    Problems registering? Click here to contact us!

    Already registered, but need a PASSWORD RESET? CLICK HERE TO RESET YOUR PASSWORD!

SnowDrift's latest activity

  • SnowDrift
    SnowDrift replied to the thread My new shop.
    I guess that is quite a span even for steel ceiling. Probably need some intermediate support between trusses.
  • SnowDrift
    SnowDrift replied to the thread Snake Oil?.
    Would be a good business decision for the military if all of a sudden the HMMVW started getting better mileage. Not that uncle sam...
  • SnowDrift
    SnowDrift replied to the thread My new shop.
    Screws. White steel on the ceiling is finished as soon as it's up. It's light to lift up into position and two people can hang it...
  • SnowDrift
    SnowDrift replied to the thread My new shop.
    Sheet rock would be a mistake under those conditions. Panels look promising. Probably better than steel interior panels due to less...
  • SnowDrift
    SnowDrift replied to the thread 12v key-on power.
    You mentioned the yellow wire is not a normal ground. Are you saying that because it doesn't go straight to a body or engine stud?
  • SnowDrift
    SnowDrift replied to the thread 12v key-on power.
    What is F-SOL?
  • SnowDrift
    SnowDrift replied to the thread 12v key-on power.
    why not just run the hour meter right off this pigtail? Are you just suggesting to power up an auxiliary fuse box for future use?
  • SnowDrift
    SnowDrift replied to the thread Blind Nuts for upper grill.
    @Glagulator what are the odds you have the part number for the push in fasteners that secure the rubber flap at the bottom of the inner...
  • SnowDrift
    SnowDrift replied to the thread 12v key-on power.
    So I can use the pink wire from this solenoid? Is there a Deutsch connector to fit this?
  • SnowDrift
    SnowDrift replied to the thread 12v key-on power.
    For an hour meter Since I have a manual wastegate controller, would that one make the most sense? Yes, 95 has the big fuse center on...
  • SnowDrift
    SnowDrift replied to the thread 12v key-on power.
    I thought so too, but everything I tested showed hot all the time
  • SnowDrift
    SnowDrift posted the thread 12v key-on power in GM 6.5 Diesel.
    Is there a place under the hood to pick this up without splicing into something like the alternator wire?
  • SnowDrift
    The heat sink is 16-18" wide X about 12" tall.
  • SnowDrift
    My PMD has been bolted to the skid plate for 20 years but will need to be relocated because one of my next steps will be to add an...
  • SnowDrift
    SnowDrift replied to the thread Fuel filter differences.
    This addresses some of it: https://www.dieselhub.com/maintenance/6.5-diesel-fuel-filter.html Not sure if I ever looked for the screen...
Back
Top