ok thanks for the input, went through the fuse panel last night all fuses were good an put a voltmeter on each wire all battery wires checked out at 13.20 power block on firewall all those wires checked out the same the exciter wire was running at 10.20 to 12.49 constant fluxuation i took...
ok fellas my entire truck is dead no power no nothing been on charger for 3 days an now the battery wont charge this is so dang cofuseing on what needs to be done any more sugestions would be apprecated
no sir, it does not ,that's why i need help ,the pigtail lets it charge while its running ,but it puts a medium drain on the battery over night i just don't know what or how to fix it i've bought a volt meter to install just wondering if i can wire it to factory wires an it work the same as it...
I've replaced altenator & battery , ran new wires to battery an altenator. The battery light still stays on voltmeter does not work unless i hit a hard bump or take off then quits again. I've put a jumper wire on single wire plug on to the battery post on altenator an batt. light went out what...
now here is the catch my alternator, starter, and battery is new even ran new wires on battery an alternator an to the block on fire wall i've put a shorty wire from alt. to the battery . my voltage meter is still saying that the charging system is not working so i jumped my one wire to my batt...