Im not getting any codes now since we fixed the transmission wires. We had also found that the MAP senors were disconnected and the cut out has gotten better, it doesnt always do it when cold and it seems to do it only when under load ie hills/passing after the truck warms up a bit.
We are...
Here you go guys I hope this helps you help me. BTW wiring has been replaced and this stall issue started to show up BEFORE the loss of fourth gear. Truck shifts like it did before the problems occurred. Havent had this truck too long, just a few months, and the PO did not give too many...
Problem: Explain your problem in concise language (ie: Cranks but won’t fire). Truck stalls (does not die) when in second gear at around 2000 rpm doesnt improve until it makes it to third gear, then stops completely except for a few rare fishbites. This happens when the truck is cold and when...
Ok it looks like it was the wires near the transmission, they were crispy and some were broken completely. Now the truck has a stutter in 2nd gear at about 2000RPM until the truck gets warm all the way, then rarely stutters.. Is this a problem with the MAP sensor?
Ok I was able to take the truck and get codes tonight,
there were 4 codes one twice....
DTC 24
DTC 24
DTC 22
DTC 49
From what I can see so far is that it needs a speed sensor, throttle position sensor, and the light for "Service Throttle Soon" is out. Am I correct?
BTW that was the...
The code came up first as the brake switch and was changed with a new one. There was no change in the truck after the switch was changed and I haven't yet went to see what the code is.
Ok I have looked far and wide on the internet..... At a fresh start-up the truck will not shift into fourth, BUT after driving around a while the Service Engine Soon light comes on then fourth and OD starts working. This continues until the truck is turned off and when restarted (even seconds...