Recent content by plrod

OA Depth of FFM outlet port Pic 2 is what was left at the bottom of the port, a small piece of the tube which came out by hand with an easy out, it was spinning around in there when I was drilling and had started to scratch the tube.FWIW it's 26.5mm OA depth to the tube and IMO if you don't or...

thanks bison, that occurred to me prior to starting the drilling process and sounds like the ideal way - I'll remove the piece of tube with an easy out after I drill to the final ID before tapping.

I'm drilling my FFM today, does anyone have an actual measurement as to the depth to drill. I'm now at 20mm deep and have measured a total depth available of 26.2mm and it looks like there's still a small piece of the outlet tube in there. Anyone? I'm assuming that the complete outlet tube...

Greetings everyone, hope all have a safe holiday season! Need to edit my sig but in the meantime: 98 K1500 Suburban 6.5 LS

how about 2013

thank Leroy!

The removal of the tank sock and install of a pre LP filter provides two benefits: 1 you will never be stranded from a plugged sock or filter as long as you carry a spare and 2 you get all the crud out of your fuel tank