• Welcome to The Truck Stop! We see you haven't REGISTERED yet.

    Your truck knowledge is missing!
    • Registration is FREE , all we need is your birthday and email. (We don't share ANY data with ANYONE)
    • We have tons of knowledge here for your diesel truck!
    • Post your own topics and reply to existing threads to help others out!
    • NO ADS! The site is fully functional and ad free!
    CLICK HERE TO REGISTER!

    Problems registering? Click here to contact us!

    Already registered, but need a PASSWORD RESET? CLICK HERE TO RESET YOUR PASSWORD!

panran's latest activity

  • P
    panran replied to the thread Fuel shutoff solenoid.
    When I gutted my fuel shutoff solenoid I mangled it a bit or bent it and it didn’t seem to sit right…that’s why I lost sleep and glad I...
    • IMG_1065.jpeg
    • IMG_1069.jpeg
  • P
    panran replied to the thread Fuel shutoff solenoid.
    The part is reassembled and works .. but when disassembling the retaining ring got slightly bent and I just worried about it…thought...
  • P
    Woke up in the middle of the night and tried searching for almost 2 hours and decided to ask: size of the internal retaining ring on...
  • P
    panran replied to the thread Eye connectors.
    Yes I noticed when I have the lift pump running.. I have a leak towards the back of the engine I’ll get under the truck in the...
  • P
    panran replied to the thread Eye connectors.
    I’m just now getting it.. I was treating the lift pump like I did the starter 15-25 seconds at a time..lol
  • P
    panran replied to the thread Eye connectors.
    Alright, so I gutted the shut off solenoid so I don’t have to crank the engine..turn the key on and jump the lift pump and leave it…okay...
  • P
    panran replied to the thread Eye connectors.
    Thanks for not giving up on all my questions gentlemen .. I almost gave up while jumping the LP and looking down in the IP seemed like...
    • IMG_1044.jpeg
    • IMG_1045.jpeg
    • IMG_1046.jpeg
  • P
    panran replied to the thread Eye connectors.
    Sometimes I overthink but this question just popped in my mind…should I take the fuel lines off the injectors ( they are already loose)...
  • P
    panran replied to the thread Eye connectors.
    I’ll try both of these this morning..if I get a good stream in the bottle and then take off the outlet fitting should I be looking for...
  • P
    panran replied to the thread Eye connectors.
    Thank all of you for the feedback..if I get it to start I’ll be doing a lot of upgrades…rebooted the brain somewhat and thought start at...
    • IMG_1028.jpeg
    • IMG_1029.jpeg
    • IMG_1030.jpeg
  • P
    panran replied to the thread Eye connectors.
    Thanks guys I’ll try it in the morning
  • P
    panran replied to the thread Eye connectors.
    I think I need to reboot my brain overnight…the coil spring in the picture below the solenoid..was under the solenoid in the IP …but...
  • P
    panran replied to the thread Eye connectors.
    I took the plunger off the fuel cutoff solenoid and there was a large spring in the well…is that supposed to be there?
    • IMG_1021.jpeg
  • P
    panran replied to the thread Eye connectors.
    Thank you so much jr I didn’t want to get deeper into more trouble…sorry to say I was feeling a little played…I often play the old age...
  • P
    panran replied to the thread Eye connectors.
    I’ve been reading a lot of threads on this and ran across one that mentioned if the truck wasn’t run in a while that the IP pump could...
Back
Top